A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.
| Qty | Descript |
|---|---|
| 1 | PCB board |
| 1 | Arduino Pro Micro |
| 1 | ProMicro socket 24 pin wide or 2.54 mm pitch female header |
| 48 | Diode 1N4148 THT |
| 2 | EC11 Rotary Encoder |
| 2 | Encoder knob |
| 46 | MX Compatible Key Switch (3pin or 5pin) |
| 46 | MX Compatible Keycap (1U) |
| 13 | M2 Spacer 5mm or 6mm (Standoff ) |
| 26 | M2 Screw 5mm |
| 1 | Top Plate (1.2mm aluminium or acrylic) |
| 1 | Upper Middle Plate (4mm acrylic) |
| 1 | Lower Middle Plate (3mm acrylic) |
| 1 | Bottom Plate (2mm or 3mm acrylic) |
| 1 | Pro Micro Cover (2mm or 3mm acrylic) |
| 1 | 8 channel WS2812 5050 RGB LED |
| 1 | Tact Switch 6X6 4mm |
Link to qmk-fork: https://github.com/ozkan/Cockpit-QMK-config
Link to zmk-fork: https://github.com/ozkan/Cockpit-ZMK-config
Telegram: mechistanbul
Huge shoutout to Arda Kılıçdağı for tons of advice and help.
PCBWay graciously offered to sponsor the prototype build of this keyboard
Thanks PCBWay