google · jboddey · May 6, 2025 · Aug 20, 2024 · Oct 11, 2024 · Oct 21, 2024
diff --git a/docs/get_started.md b/docs/get_started.md
@@ -74,7 +74,7 @@ Follow these steps to start Testrun:
     Notes:
 
     -  Disable both adapters in the host system (IPv4, IPv6, and general) by opening **Settings**, then **Network**.
-    -  Keep the DUT powered off until prompted.
+    -  Keep the DUT powered off until prompted. Otherwise, Testrun will not be able to fully capture the device behavior during startup - resulting in inaccurate test results.
 
 1. Start Testrun with the command `sudo testrun`
     -  To run Testrun in network-only mode (without running any tests), use the `--net-only` option.
@@ -87,25 +87,42 @@ Follow these steps to start Testrun:
 Follow these steps to test your IoT device:
 
 1. Open Testrun by navigating  to [http://localhost:8080](http://localhost:8080/) in your browser.
-2. Select the **Settings** menu in the top-right corner, then select your network interfaces. You can change the settings at any time.  
-     ![Settings menu button](/docs/ui/getstarted--7cfvdpdnc5o.png)
-3. Select the **Certificates** menu in the top-right corner, then upload your local CA certificates for TLS server testing.
-     ![Certificates menu button](/docs/ui/getstarted--j21skepmx1.png)
-5. Select the **Device Repository** icon on the left panel to add a new device for testing.  
-     ![Device repository button](/docs/ui/getstarted--q5uw26tfod.png)
-6. Select the **Add Device** button.
-7. Enter the MAC address, manufacturer name, and model number.
+2. Select the **Settings** menu in the top-right corner. It will open the **General** tab by default. Then select your network interfaces. You can change the settings at any time.
+     ![Settings menu button](/docs/ui/getstarted-settings-menu.png)
+3. Select  the **Certificates** tab (Settings menu), then upload your local CA certificates for TLS server testing.
+     ![Certificates menu button](/docs/ui/getstarted-certificates-menu.png)
+4. Select the **Device Repository** icon on the left panel to add a new device for testing.  
+     ![Device repository button](/docs/ui/getstarted-device-repository.png)
+
+    Or
+
+    Click the **Actions** button to add a new device for testing.
+   ![Actions button](/docs/ui/getstarted-actions-device.png)
+5. Select the **Add Device** button on the Device repository.
+   ![Add device](/docs/ui/getstarted-add-device.png)
+6. Enter the MAC address, manufacturer name, and model number.
+7. Select Qualification or Pilot program.
 8. Select the test modules you want to enable for this device.   
 Note: For qualification purposes, you must select all.
-9. Select **Save**.
-10. Select the Testrun progress icon, then select the **Testing** button.![Testing button](/docs/ui/getstarted--w09wecsry3.png)
-
-11. Select the device you want to test.
-12. Enter the version number of the firmware running on the device.
-13. Select **Start Testrun**.
--  If you need to stop Testrun during testing, select **Stop** next to the test name.
-12. Once the Waiting for Device notification appears, power on the device under test. A report appears under the Reports icon once the test sequence is complete.  
-     ![Reports button](/docs/ui/getstarted--m4si1otdu5d.png)
+9. Answer a few questions about your device.
+10. Select **Save**.
+11. Select the Testrun progress icon, then select the **Testing** button.![Testing button](/docs/ui/getstarted-testing.png)
+
+    Or
+
+    Click the **Actions** button, then select the **Start Testing** button.
+    ![Actions button](/docs/ui/getstarted-actions-testing.png)
+
+12. Select the device you want to test.
+13. Enter the version number of the firmware running on the device.
+14. Select **Start Testrun**.
+  -  If you need to stop Testrun during testing, select **Stop** next to the test name.
+15. Once the Waiting for Device notification appears, power on the device under test.
+   ![Waiting for device](/docs/ui/getstarted-waiting-for-device.png)
+16. While testing is in progress, you could complete a Risk Assessment. To do so, go to the **Risk assessment** tab.
+   ![Risk assessment](/docs/ui/getstarted-risk-assessment.png)
+17. A report appears under the Reports icon once the test sequence is complete.  
+   ![Reports button](/docs/ui/getstarted-reports.png)
 
 # Troubleshooting
 

diff --git a/docs/roadmap.pdf b/docs/roadmap.pdf
diff --git a/docs/rooadmap.pdf b/docs/rooadmap.pdf
diff --git a/docs/ui/getstarted--7cfvdpdnc5o.png b/docs/ui/getstarted--7cfvdpdnc5o.png
diff --git a/docs/ui/getstarted--j21skepmx1.png b/docs/ui/getstarted--j21skepmx1.png
diff --git a/docs/ui/getstarted--m4si1otdu5d.png b/docs/ui/getstarted--m4si1otdu5d.png
diff --git a/docs/ui/getstarted--q5uw26tfod.png b/docs/ui/getstarted--q5uw26tfod.png
diff --git a/docs/ui/getstarted--w09wecsry3.png b/docs/ui/getstarted--w09wecsry3.png
diff --git a/docs/ui/getstarted-actions-device.png b/docs/ui/getstarted-actions-device.png
diff --git a/docs/ui/getstarted-actions-testing.png b/docs/ui/getstarted-actions-testing.png
diff --git a/docs/ui/getstarted-add-device.png b/docs/ui/getstarted-add-device.png
diff --git a/docs/ui/getstarted-certificates-menu.png b/docs/ui/getstarted-certificates-menu.png
diff --git a/docs/ui/getstarted-device-repository.png b/docs/ui/getstarted-device-repository.png
diff --git a/docs/ui/getstarted-reports.png b/docs/ui/getstarted-reports.png
diff --git a/docs/ui/getstarted-risk-assessment.png b/docs/ui/getstarted-risk-assessment.png
diff --git a/docs/ui/getstarted-settings-menu.png b/docs/ui/getstarted-settings-menu.png
diff --git a/docs/ui/getstarted-testing.png b/docs/ui/getstarted-testing.png
diff --git a/docs/ui/getstarted-waiting-for-device.png b/docs/ui/getstarted-waiting-for-device.png
diff --git a/make/DEBIAN/control b/make/DEBIAN/control
@@ -1,5 +1,5 @@
 Package: Testrun
-Version: 2.1.1
+Version: 2.2
 Architecture: amd64
 Maintainer: Google <boddey@google.com>
 Homepage: https://github.com/google/testrun