CEP-78: Enhanced NFT standard

Design Goals

• DApp developers attempting to create an NFT contract should be able to install the contract as is configured for the specific built-in behavior they want their NFT contract instance to have. Must work out of the box.
• Reference implementation must be straightforward, clear, and obvious.
• Externally observable association between Accounts and/or Contracts and NFTs they "own".
• Should be well documented with exhaustive tests that prove all possible combinations of defined behavior work as intended.
• Must be entirely self-contained within a singular repo; this includes all code, all tests, all relevant CasperLabs provided SDKs and all relevant documentation.
• Must support mainstream expectations about common NFT conventions.
• A given NFT contract instance must be able to choose when created if it is using a Metadata schema conformant with existing community standards or a specific custom schema that they provide.
• A NFT contract instance must validate provided metadata against the specified metadata schema for that contract.
• Standardized session code to interact with an NFT contract instance must be usable as is, so that a given DApp developer doesn't have to write any Wasm producing logic for normal usage of NFT contract instances produced by this contract.

Table of Contents

1. Modalities

2. Usage

3. Installing and Interacting with the Contract using the Rust Casper Client

4. Test Suite and Specification

5. Error Codes

Modalities

The enhanced NFT implementation supports various 'modalities' that dictate the behavior of a specific contract instance. Modalities represent the common expectations around contract usage and behavior. The following section discusses the currently implemented modalities and illustrates the significance of each.

Ownership

This modality specifies the behavior regarding ownership of NFTs and whether the owner of the NFT can change over the contract's lifetime. There are three modes:

1. Minter: Minter mode is where the ownership of the newly minted NFT is attributed to the minter of the NFT and cannot be specified by the minter. In the Minter mode the owner of the NFT will not change and thus cannot be transferred to another entity.
2. Assigned: Assigned mode is where the owner of the newly minted NFT must be specified by the minter of the NFT. In this mode, the assigned entity can be either minter themselves or a separate entity. However, similar to the Minter mode, the ownership in this mode cannot be changed, and NFTs minted in this mode cannot be transferred from one entity to another.
3. Transferable: In the Transferable mode the owner of the newly minted NFT must be specified by the minter. However, in the Transferable mode, NFTs can be transferred from the owner to another entity.

In all the three mentioned modes, the owner entity is currently restricted to Accounts on the Casper network.

Note: In the Transferable mode, it is possible to transfer the NFT to an Account that does not exist.

This Ownership mode is a required installation parameter and cannot be changed once the contract has been installed. The mode is passed in as u8 value to the "ownership_mode" runtime argument.

Ownership	u8
Minter	0
Assigned	1
Transferable	2

The ownership mode of a contract can be determined by querying the ownership_mode entry within the contract's NamedKeys.

NFTKind

The NFTKind modality specifies the commodity that NFTs minted by a particular contract will represent. Currently, the NFTKind modality does not alter or govern the behavior of the contract itself and only exists to specify the correlation between on-chain data and off-chain items. There are three different variations of the NFTKind mode.

1. Physical: The NFT represents a real-world physical item e.g., a house.
2. Digital: The NFT represents a digital item, e.g., a unique JPEG or digital art.
3. Virtual: The NFT is the virtual representation of a physical notion, e.g., a patent or copyright.

The NFTKind mode is a required installation parameter and cannot be changed once the contract has been installed. The mode is passed in as a u8 value to nft_kind runtime argument.

NFTKind	u8
Physical	0
Digital	1
Virtual	2

NFTHolderMode

The NFTHolderMode dictates which entities on a Casper network can own and mint NFTs. There are three different options currently available:

1. Accounts: In this mode, only Accounts can own and mint NFTs.
2. Contracts: In this mode, only Contracts can own and mint NFTs.
3. Mixed: In this mode both Accounts and Contracts can own and mint NFTs.

If the NFTHolderMode is set to Contracts a ContractHash whitelist must be provided. This whitelist dictates which Contracts are allowed to mint NFTs in the restricted Installer minting mode.

NFTHolderMode	u8
Accounts	0
Contracts	1
Mixed	2

This modality is an optional installation parameter and will default to the Mixed mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is passed in as a u8 value to nft_holder_mode runtime argument.

WhitelistMode

The WhitelistMode dictates if the contract whitelist restricting access to the mint entrypoint can be updated. There are currently two options:

1. Unlocked: The contract whitelist is unlocked and can be updated via the set variables endpoint.
2. Locked: The contract whitelist is locked and cannot be updated further.

This WhitelistMode is an optional installation parameter and will be set to unlocked if not passed. However, the whitelist mode itself cannot be changed once the contract has been installed. The mode is passed in as a u8 value to whitelist_mode runtime argument.

WhitelistMode	u8
Unlocked	0
Locked	1

Minting

The minting mode governs the behavior of contract when minting new tokens. The minting modality provides two options:

1. Installer: This mode restricts the ability to mint new NFT tokens only to the installing account of the NFT contract.
2. Public: This mode allows any account to mint NFT tokens.

This modality is an optional installation parameter and will default to the Installer mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is set by passing a u8 value to the minting_mode runtime argument.

MintingMode	u8
Installer	0
Public	1

NFTMetadataKind

This modality dictates the schema for the metadata for NFTs minted by a given instance of an NFT contract. There are four supported modalities:

1. CEP78: This mode specifies that NFTs minted must have valid metadata conforming to the CEP-78 schema.
2. NFT721: This mode specifies that NFTs minted must have valid metadata conforming to the NFT-721 metadata schema.
3. Raw: This mode specifies that metadata validation will not occur and raw strings can be passed to token_metadata runtime argument as part of the call to mint entry point.
4. CustomValidated: This mode specifies that a custom schema provided at the time of install will be used when validating the metadata as part of the call to mint entry point.

CEP-78 metadata example

{
  "name": "John Doe",
  "token_uri": "https://www.barfoo.com",
  "checksum": "940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb"
}

NFT-721 metadata example

{
  "name": "John Doe",
  "symbol": "abc",
  "token_uri": "https://www.barfoo.com"
}

Custom Validated

The CEP-78 implementation allows installers of the contract to provide their custom schema at the time of installation. The schema is passed as a String value to json_schema runtime argument at the time of installation. Once provided, the schema for a given instance of the contract cannot be changed.

The custom JSON schema must contain a top-level properties field. An example of a valid JSON schema is provided. In this example, each property has a name, the description of the property itself, and whether the property is required to be present in the metadata. If the metadata kind is not set to custom validated, then the value passed to the json_schema runtime argument will be ignored.

Example Custom Validated schema

{
   "properties":{
      "deity_name":{
         "name":"deity_name",
         "description":"The name of deity from a particular pantheon.",
         "required":true
      },
      "mythology":{
         "name":"mythology",
         "description":"The mythology the deity belongs to.",
         "required":true
      }
   }
}

Example Custom Metadata

{
  "deity_name": "Baldur",
  "mythology": "Nordic"
}

NFTMetadataKind	u8
CEP78	0
NFT721	1
Raw	2
CustomValidated	3

NFTIdentifierMode

The identifier mode governs the primary identifier for NFTs minted for a given instance on an installed contract. This modality provides two options:

1. Ordinal: NFTs minted in this modality are identified by a u64 value. This value is determined by the number of NFTs minted by the contract at the time the NFT is minted.
2. Hash: NFTs minted in this modality are identified by a base16 encoded representation of the blake2b hash of the metadata provided at the time of mint.

Since the primary identifier in the Hash mode is derived by hashing over the metadata, making it a content-addressed identifier, the metadata for the minted NFT cannot be updated after the mint. Attempting to install the contract with the MetadataMutability modality set to Mutable in the Hash identifier mode will raise an error. This modality is a required installation parameter and cannot be changed once the contract has been installed. It is passed in as a u8 value to the identifier_mode runtime argument.

NFTIdentifierMode	u8
Ordinal	0
Hash	1

Metadata Mutability

The metadata mutability mode governs the behavior around updates to a given NFTs metadata. This modality provides two options:

1. Immutable: Metadata for NFTs minted in this mode cannot be updated once the NFT has been minted.
2. Mutable: Metadata for NFTs minted in this mode can update the metadata via the set_token_metadata entry point.

The Mutable option cannot be used in conjunction with the Hash modality for the NFT identifier; attempting to install the contract with this configuration raises InvalidMetadataMutability error. This modality is a required installation parameter and cannot be changed once the contract has been installed. It is passed in as a u8 value to the metadata_mutability runtime argument.

MetadataMutability	u8
Immutable	0
Mutable	1

BurnMode

The BurnMode modality dictates whether tokens minted by a given instance of an NFT contract can be burnt. This modality provides two options:

1. Burnable: Minted tokens can be burnt.
2. NonBurnable: Minted tokens cannot be burnt.

BurnMode	u8
Burnable	0
NonBurnable	1

This modality is an optional installation parameter and will default to the Burnable mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is set by passing a u8 value to the burn_mode runtime argument.

Modality Conflicts

The MetadataMutability option of Mutable cannot be used in conjunction with NFTIdentifierMode modality of Hash.

Usage

Installing the contract.

The main.rs file within the contract provides the installer for the NFT contract. Users can compile the contract to Wasm using the make build-contract with the provided Makefile.

The pre-built Wasm for the contract and all other utility session code can be found as part of the most current release. Users wishing to build the Wasm themselves can pull the code and the make build-contract provided in the included Makefile. Please note, however, that as part of building the contract, you will need to install wasm-strip.

The call method will install the contract with the necessary entry points and call init() entry point to allow the contract to self initialize and setup the necessary state to allow for operation, The following are the required runtime arguments that must be passed to the installer session code to correctly install the NFT contract.

• "collection_name": The name of the NFT collection, passed in as a String. This parameter is required and cannot be changed post installation.
• "collection_symbol": The symbol representing a given NFT collection, passed in as a String. This parameter is required and cannot be changed post installation.
• "total_token_supply": The total number of NFTs that a specific instance of a contract will mint passed in as a U64 value. This parameter is required and cannot be changed post installation.
• "ownership_mode": The OwnershipMode modality that dictates the ownership behavior of the NFT contract. This argument is passed in as a u8 value and is required at the time of installation.
• "nft_kind": The NFTKind modality that specifies the off-chain items represented by the on-chain NFT data. This argument is passed in as a u8 value and is required at the time of installation.
• "json_schema": The JSON schema for the NFT tokens that will be minted by the NFT contract passed in as a String. This parameter is required if the metadata kind is set to CustomValidated(4) and cannot be changed post installation.
• "nft_metadata_kind": The metadata schema for the NFTs to be minted by the NFT contract. This argument is passed in as a u8 value and is required at the time of installation.
• "identifier_mode": The NFTIdentifierMode modality dictates the primary identifier for NFTs minted by the contract. This argument is passed in as a u8 value and is required at the time of installation.
• "metadata_mutability": The MetadataMutability modality dictates whether the metadata of minted NFTs can be updated. This argument is passed in as a u8 value and is required at the time of installation.

The following are the optional parameters that can be passed in at the time of installation.

• "minting_mode": The MintingMode modality that dictates the access to the mint() entry-point in the NFT contract. This is an optional parameter that will default to restricting access to the installer of the contract. This parameter cannot be changed once the contract has been installed.
• "allow_minting": The "allow_minting" flag allows the installer of the contract to pause the minting of new NFTs. The allow_minting is a boolean toggle that allows minting when true. If not provided at install the toggle will default to true. This value can be changed by the installer by calling the set_variables() entry point.
• "whitelist_mode": The WhitelistMode modality dictates whether the contract whitelist can be updated. This optional parameter will default to an unlocked whitelist that can be updated post installation. This parameter cannot be changed once the contract has been installed.
• "holder_mode": The NFTHolderMode modality dictates which entities can hold NFTs. This is an optional parameter and will default to a mixed mode allowing either Accounts or Contracts to hold NFTs. This parameter cannot be changed once the contract has been installed.
• "contract_whitelist": The contract whitelist is a list of contract hashes that specifies which contracts can call the mint() entrypoint to mint NFTs. This is an optional parameter which will default to an empty whitelist. This value can be changed via the set_variables post installation. If the whitelist mode is set to locked, a non-empty whitelist must be passed; else, installation of the contract will fail.
• "burn_mode": The BurnMode modality dictates whether minted NFTs can be burnt. This is an optional parameter and will allow tokens to be burnt by default. This parameter cannot be changed once the contract has been installed.

Example deploy

The following is an example of deploying the installation of the NFT contract via the Rust Casper command client.

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm --session-arg "collection_name:string='enhanced-nft-1'" --session-arg "collection_symbol:string='ENFT-1'" --session-arg "total_token_supply:u256='10'" --session-arg "ownership_mode:u8='0'" --session-arg "nft_kind:u8='1'" --session-arg "json_schema:string='nft-schema'" --session-arg "allow_minting:bool='true'" 

Utility session code

Specific entry points in use by the current implementation of the NFT contract require session code to accept return values passed by the contract over the Wasm boundary. In order to help with the installation and use of the NFT contract, session code for such entry points has been provided. It is recommended that users and DApp developers attempting to engage with the NFT contract do so with the help of the provided utility session code. The session code can be found in the client folder within the project folder.

Entry point name	Session code
"mint"	client/mint_session
"balance_of"	client/balance_of_session
"get_approved	client/get_approved_session
"owner_of"	client/owner_of_session
"transfer"	client/transfer_session

Installing and Interacting with the Contract using the Rust Casper Client

This contract code installs an instance of the CEP-78 enhanced NFT standard as per session arguments provided at the time of installation.

This contract requires a minimum Rust version of 1.63.0.

Installing the Contract

Installing the enhanced NFT contract to global state requires the use of a Deploy. In this case, the session code can be compiled to Wasm by running the make build-contract command provided in the Makefile at the top level. The Wasm will be found in the contract/target/wasm32-unknown-unknown/release directory as contract.wasm.

Below is an example of a casper-client command that provides all required session arguments to install a valid instance of the CEP-78 contract on global state.

• casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm

1. --session-arg "collection_name:string='CEP-78-collection'"

   The name of the NFT collection as a string. In this instance, "CEP-78-collection".

2. --session-arg "collection_symbol:string='CEP78'"

   The symbol representing the NFT collection as a string. In this instance, "CEP78".

3. --session-arg "total_token_supply:u64='100'"

   The total supply of tokens to be minted. In this instance, 100. If the contract owner is unsure of the total number of NFTs they will require, they should err on the side of caution. This value cannot be changed at a later date.

4. --session-arg "ownership_mode:u8='2'"

   The ownership mode for this contract. In this instance the 2 represents "Transferable" mode. Under these conditions, users can freely transfer their NFTs between one another.

5. --session-arg "nft_kind:u8='1'"

   The type of commodity represented by these NFTs. In this instance, the 1 represents a digital collection.

6. --session-arg "nft_metadata_kind:u8='0'"

   The type of metadata used by this contract. In this instance, the 0 represents CEP-78 standard for metadata.

7. --session-arg "json_schema:string=''"

   An empty JSON string, as the contract has awareness of the CEP-78 JSON schema. Using the custom validated modality would require passing through a valid JSON schema for your custom metadata.

8. --session-arg "identifier_mode:u8='0'"

   The mode used to identify individual NFTs. For 0, this means an ordinal identification sequence rather than by hash.

9. --session-arg "metadata_mutability:u8='0'"

   A setting allowing for mutability of metadata. This is only available when using the ordinal identification mode, as the hash mode depends on immutability for identification. In this instance, despite ordinal identification, the 0 represents immutable metadata.

The session arguments match the available modalities as listed in this README.

Casper client command without comments

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm 
--session-arg "collection_name:string='CEP-78-collection'" 
--session-arg "collection_symbol:string='CEP78'" 
--session-arg "total_token_supply:u64='100'" 
--session-arg "ownership_mode:u8='2'" 
--session-arg "nft_kind:u8='1'" 
--session-arg "nft_metadata_kind:u8='0'" 
--session-arg "json_schema:string=''"
--session-arg "identifier_mode:u8='0'" 
--session-arg "metadata_mutability:u8='0'"

Minting an NFT

Below is an example of a casper-client command that uses the mint function of the contract to mint an NFT for the user associated with node-1 in an NCTL environment.

• casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/mint_session/target/wasm32-unknown-unknown/release/mint_call.wasm

1. --session-arg "nft_contract_hash:key='hash-206339c3deb8e6146974125bb271eb510795be6f250c21b1bd4b698956669f95'"

   The contract hash of the previously installed CEP-78 NFT contract from which we will be minting.

2. --session-arg "token_owner:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"

   The account hash of the account receiving the minted token.

3. --session-arg "token_meta_data:string='{\"name\": \"John Doe\",\"token_uri\": \"https:\/\/www.barfoo.com\",\"checksum\": \"940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb\"}'"

   Metadata describing the NFT to be minted, passed in as a string.

Casper client command without comments

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/mint_session/target/wasm32-unknown-unknown/release/mint_call.wasm
--session-arg "nft_contract_hash:key='hash-206339c3deb8e6146974125bb271eb510795be6f250c21b1bd4b698956669f95'"
--session-arg "token_owner:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"
--session-arg "token_meta_data:string='{\"name\": \"John Doe\",\"token_uri\": \"https:\/\/www.barfoo.com\",\"checksum\": \"940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb\"}'"

Transferring NFTs Between Users

Below is an example of a casper-client command that uses the transfer function to transfer ownership of an NFT from one user to another. In this case, we are transferring the previously minted NFT from the user associated with node-2 to the user associated with node-3.

• casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-2/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/transfer_session/target/wasm32-unknown-unknown/release/transfer_call.wasm

1. --session-arg "nft_contract_hash:key='hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5'"

   The contract hash of the CEP-78 NFT Contract associated with the NFT to be transferred.

2. --session-arg "source_key:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"

   The account hash of the user that currently owns the NFT and wishes to transfer it.

3. --session-arg "target_key:key='account-hash-b4772e7c47e4deca5bd90b7adb2d6e884f2d331825d5419d6cbfb59e17642aab'"

   The account hash of the user that will receive the NFT.

4. --session-arg "is_hash_identifier_mode:bool='false'"

   Argument that the hash identifier mode is ordinal, thereby requiring a token_id rather than a token_hash.

5. --session-arg "token_id:u64='0'"

   The token_id of the NFT to be transferred.

Casper client command without comments

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-2/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/transfer_session/target/wasm32-unknown-unknown/release/transfer_call.wasm 
--session-arg "nft_contract_hash:key='hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5'" 
--session-arg "source_key:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'" 
--session-arg "target_key:key='account-hash-b4772e7c47e4deca5bd90b7adb2d6e884f2d331825d5419d6cbfb59e17642aab'" 
--session-arg "is_hash_identifier_mode:bool='false'" 
--session-arg "token_id:u64='0'"  

Burning an NFT

Below is an example of a casper-client command that uses the burn function to burn an NFT within a CEP-78 collection. If this command is used, the NFT in question will no longer be accessible by anyone.

• casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem

1. --session-hash hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5

   The session hash corresponding to the NFT's contract hash.

2. --session-entry-point "burn"

   The entry point corresponding to the burn function.

3. --session-arg "token_id:u64='1'"

   The token ID for the NFT to be burned. If the identifier_mode is not set to Ordinal, you must provide the token_hash instead.

Casper client command without comments

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem
--session-hash hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5
--session-entry-point "burn"
--session-arg "token_id:u64='1'"

Test Suite and Specification

The expected behavior of the NFT contract implementation is asserted by its test suite found in the tests folder. The test suite and the corresponding unit tests comprise the specification around the contract and outline the expected behaviors of the NFT contract across the entire range of possible configurations (i.e modalities and toggles like allow minting). The test suite ensures that as new modalities are added, and current modalities are extended, no regressions and conflicting behaviors are introduced. The test suite also asserts the correct working behavior of the utility session code provided in the client folder. The tests can be run by using the provided Makefile and running the make test command.

Error Codes

Code	Error
1	InvalidAccount
2	MissingInstaller
3	InvalidInstaller
4	UnexpectedKeyVariant
5	MissingTokenOwner
6	InvalidTokenOwner
7	FailedToGetArgBytes
8	FailedToCreateDictionary
9	MissingStorageUref
10	InvalidStorageUref
11	MissingOwnerUref
12	InvalidOwnersUref
13	FailedToAccessStorageDictionary
14	FailedToAccessOwnershipDictionary
15	DuplicateMinted
16	FailedToConvertCLValue
17	MissingCollectionName
18	InvalidCollectionName
19	FailedToSerializeMetaData
20	MissingAccount
21	MissingMintingStatus
22	InvalidMintingStatus
23	MissingCollectionSymbol
24	InvalidCollectionSymbol
25	MissingTotalTokenSupply
26	InvalidTotalTokenSupply
27	MissingTokenID
28	InvalidTokenIdentifier
29	MissingTokenOwners
30	MissingAccountHash
31	InvalidAccountHash
32	TokenSupplyDepleted
33	MissingOwnedTokensDictionary
34	TokenAlreadyBelongsToMinterFatal
35	FatalTokenIdDuplication
36	InvalidMinter
37	MissingMintingMode
38	InvalidMintingMode
39	MissingInstallerKey
40	FailedToConvertToAccountHash
41	InvalidBurner
42	PreviouslyBurntToken
43	MissingAllowMinting
44	InvalidAllowMinting
45	MissingNumberOfMintedTokens
46	InvalidNumberOfMintedTokens
47	MissingTokenMetaData
48	InvalidTokenMetaData
49	MissingApprovedAccountHash
50	InvalidApprovedAccountHash
51	MissingApprovedTokensDictionary
52	TokenAlreadyApproved
53	MissingApproveAll
54	InvalidApproveAll
55	MissingOperator
56	InvalidOperator
57	Phantom
58	ContractAlreadyInitialized
59	MintingIsPaused
60	FailureToParseAccountHash
61	VacantValueInDictionary
62	MissingOwnershipMode
63	InvalidOwnershipMode
64	InvalidTokenMinter
65	MissingOwnedTokens
66	InvalidAccountKeyInDictionary
67	MissingJsonSchema
68	InvalidJsonSchema
69	InvalidKey
70	InvalidOwnedTokens
71	MissingTokenURI
72	InvalidTokenURI
73	MissingNftKind
74	InvalidNftKind
75	MissingHolderMode
76	InvalidHolderMode
77	MissingWhitelistMode
78	InvalidWhitelistMode
79	MissingContractWhiteList
80	InvalidContractWhitelist
81	UnlistedContractHash
82	InvalidContract
83	EmptyContractWhitelist
84	MissingReceiptName
85	InvalidReceiptName
86	InvalidJsonMetadata
87	InvalidJsonFormat
88	FailedToParseCep78Metadata
89	FailedToParse721Metadata
90	FailedToParseCustomMetadata
91	InvalidCEP78Metadata
92	FailedToJsonifyCEP78Metadata
93	InvalidNFT721Metadata
94	FailedToJsonifyNFT721Metadata
95	InvalidCustomMetadata
96	MissingNFTMetadataKind
97	InvalidNFTMetadataKind
98	MissingIdentifierMode
99	InvalidIdentifierMode
100	FailedToParseTokenId
101	MissingMetadataMutability
102	InvalidMetadataMutability
103	FailedToJsonifyCustomMetadata
104	ForbiddenMetadataUpdate
105	MissingBurnMode
106	InvalidBurnMode