rigctl

SPert 1000 (https://rjk.com.pl/spert1000/) + radio CAT control application.

Supported radios:

• Yaesu FTdx10
• Yaesu FT-991A (limited, w/o split)

Features:

Two separate windows, each can work independently, i.e., you can use the application only for SPert control.

SPert 1000 HF power amplifier:

• Serial port auto-discover: automatically find proper serial port name
• Monitor TX forwarded and reflected power, temperature
• Control ATU: on/off and tuning
• Control fan mode
• Software QRO on/off
• Control output power
• Keyboard shortcuts

Radio:

• Serial port auto-discover: automatically find proper serial port name
• Expose FLRIG server for integration with WSJT-X/Logbooks, etc, just configure other applications to use FLRIG interface on 12345 port
• Monitor current VFO frequency, mode
• S-meter
• Monitor TX forwarded and reflected power
• Band switch
• Filters DNR, DNF
• Split operations: on/off, up 5, up 10 with single click, TXW (listen on TX frequency)
• Control output power and digital gain
• Keyboard shortcuts

Integrations available, when both devices connected

• SPert reflected power is saved for a particular frequency obtained from the radio, and you get a prompt to switch on ATU or even QRO can be blocked if the saved SWR is too high. Please note: you must "learn" the application first.
• SPert ATU settings L/C are saved for a particular frequency obtained from the radio, and you get a prompt to re-tune ATU if the frequency changes and previous L/C for the new frequency are different.
• When the radio band is changed, SPert ATU is automatically turned off.

Dependencies

Application is using patched LazSynaSer from https://github.com/JurassicPork/TLazSerial

Application is using icons from following authors:

• https://www.iconfinder.com/Allfreeicons
• https://www.iconfinder.com/iconsets/developerkit

For license see LICENSE

MacOS release process

iconutil --convert icns icon.iconset
mv ./icon.icns binaries/darwin_x86_64/RadioShackCtl.app/Contents/Resources/RadioShackCtl.icns
cp -f ./Info.plist binaries/darwin_x86_64/RadioShackCtl.app/Contents/Info.plist
rm -f binaries/darwin_x86_64/RadioShackCtl.app/Contents/MacOS/RadioShackCtl
mv binaries/darwin_x86_64/RadioShackCtl binaries/darwin_x86_64/RadioShackCtl.app/Contents/MacOS/
touch binaries/darwin_x86_64/RadioShackCtl.app
ln -s /Applications binaries/darwin_x86_64/Applications

Run disk util (Narzędzie dyskowe) and use menu: File -> New image -> Image from folder.

Finally after release:

rm -f binaries/darwin_x86_64/RadioShackCtl.app/Contents/MacOS/RadioShackCtl