Adapt the project to CuatroElixir org

.credo.exs

@@ -10,7 +10,7 @@
   configs: [
     %{
       #
-      # Run any exec using `mix credo -C <name>`. If no exec name is given
+      # Run any config using `mix credo -C <name>`. If no config name is given
       # "default" is used.
       #
       name: "default",
@@ -21,10 +21,23 @@
         # You can give explicit globs or simply directories.
         # In the latter case `**/*.{ex,exs}` will be used.
         #
-        included: ["lib/", "src/", "test/", "web/", "apps/"],
-        excluded: [~r"/_build/", ~r"/deps/"]
+        included: [
+          "lib/",
+          "src/",
+          "test/",
+          "web/",
+          "apps/*/lib/",
+          "apps/*/src/",
+          "apps/*/test/",
+          "apps/*/web/"
+        ],
+        excluded: [~r"/_build/", ~r"/deps/", ~r"/node_modules/"]
       },
       #
+      # Load and configure plugins here:
+      #
+      plugins: [],
+      #
       # If you create your own checks, you must specify the source files for
       # them here, so they can be loaded by Credo before running the analysis.
       #
@@ -35,6 +48,10 @@
       #
       strict: false,
       #
+      # To modify the timeout for parsing files, change this value:
+      #
+      parse_timeout: 5000,
+      #
       # If you want to use uncolored output by default, you can change `color`
       # to `false` below:
       #
@@ -47,118 +64,155 @@
       #
       #     {Credo.Check.Design.DuplicatedCode, false}
       #
-      checks: [
-        #
-        ## Consistency Checks
-        #
-        {Credo.Check.Consistency.ExceptionNames},
-        {Credo.Check.Consistency.LineEndings},
-        {Credo.Check.Consistency.ParameterPatternMatching},
-        {Credo.Check.Consistency.SpaceAroundOperators},
-        {Credo.Check.Consistency.SpaceInParentheses},
-        {Credo.Check.Consistency.TabsOrSpaces},
-
-        #
-        ## Design Checks
-        #
-        # You can customize the priority of any check
-        # Priority values are: `low, normal, high, higher`
-        #
-        {Credo.Check.Design.AliasUsage, priority: :low},
-        # For some checks, you can also set other parameters
-        #
-        # If you don't want the `setup` and `test` macro calls in ExUnit tests
-        # or the `schema` macro in Ecto schemas to trigger DuplicatedCode, just
-        # set the `excluded_macros` parameter to `[:schema, :setup, :test]`.
-        #
-        {Credo.Check.Design.DuplicatedCode, excluded_macros: []},
-        # You can also customize the exit_status of each check.
-        # If you don't want TODO comments to cause `mix credo` to fail, just
-        # set this value to 0 (zero).
-        #
-        {Credo.Check.Design.TagTODO},
-        {Credo.Check.Design.TagFIXME},
+      checks: %{
+        enabled: [
+          #
+          ## Consistency Checks
+          #
+          {Credo.Check.Consistency.ExceptionNames, []},
+          {Credo.Check.Consistency.LineEndings, []},
+          {Credo.Check.Consistency.ParameterPatternMatching, []},
+          {Credo.Check.Consistency.SpaceAroundOperators, []},
+          {Credo.Check.Consistency.SpaceInParentheses, []},
+          {Credo.Check.Consistency.TabsOrSpaces, []},
 
-        #
-        ## Readability Checks
-        #
-        {Credo.Check.Readability.FunctionNames},
-        {Credo.Check.Readability.LargeNumbers},
-        {Credo.Check.Readability.MaxLineLength, priority: :low, max_length: 80},
-        {Credo.Check.Readability.ModuleAttributeNames},
-        {Credo.Check.Readability.ModuleDoc},
-        {Credo.Check.Readability.ModuleNames},
-        {Credo.Check.Readability.ParenthesesOnZeroArityDefs},
-        {Credo.Check.Readability.ParenthesesInCondition},
-        {Credo.Check.Readability.PredicateFunctionNames},
-        {Credo.Check.Readability.PreferImplicitTry},
-        {Credo.Check.Readability.RedundantBlankLines},
-        {Credo.Check.Readability.StringSigils},
-        {Credo.Check.Readability.TrailingBlankLine},
-        {Credo.Check.Readability.TrailingWhiteSpace},
-        {Credo.Check.Readability.VariableNames},
-        {Credo.Check.Readability.Semicolons},
-        {Credo.Check.Readability.SpaceAfterCommas},
+          #
+          ## Design Checks
+          #
+          # You can customize the priority of any check
+          # Priority values are: `low, normal, high, higher`
+          #
+          {Credo.Check.Design.AliasUsage,
+           [priority: :low, if_nested_deeper_than: 2, if_called_more_often_than: 0]},
+          {Credo.Check.Design.TagFIXME, []},
+          # You can also customize the exit_status of each check.
+          # If you don't want TODO comments to cause `mix credo` to fail, just
+          # set this value to 0 (zero).
+          #
+          {Credo.Check.Design.TagTODO, [exit_status: 2]},
 
-        #
-        ## Refactoring Opportunities
-        #
-        {Credo.Check.Refactor.DoubleBooleanNegation},
-        {Credo.Check.Refactor.CondStatements, false},
-        {Credo.Check.Refactor.CyclomaticComplexity},
-        {Credo.Check.Refactor.FunctionArity},
-        {Credo.Check.Refactor.LongQuoteBlocks, false},
-        {Credo.Check.Refactor.MatchInCondition},
-        {Credo.Check.Refactor.NegatedConditionsInUnless},
-        {Credo.Check.Refactor.NegatedConditionsWithElse},
-        {Credo.Check.Refactor.Nesting, false},
-        {Credo.Check.Refactor.PipeChainStart, false},
-        # excluded_argument_types: [:atom, :binary, :fn, :keyword], excluded_functions: []},
-        {Credo.Check.Refactor.UnlessWithElse},
+          #
+          ## Readability Checks
+          #
+          {Credo.Check.Readability.AliasOrder, []},
+          {Credo.Check.Readability.FunctionNames, []},
+          {Credo.Check.Readability.LargeNumbers, []},
+          {Credo.Check.Readability.MaxLineLength, [priority: :low, max_length: 120]},
+          {Credo.Check.Readability.ModuleAttributeNames, []},
+          {Credo.Check.Readability.ModuleDoc, []},
+          {Credo.Check.Readability.ModuleNames, []},
+          {Credo.Check.Readability.ParenthesesInCondition, []},
+          {Credo.Check.Readability.ParenthesesOnZeroArityDefs, []},
+          {Credo.Check.Readability.PipeIntoAnonymousFunctions, []},
+          {Credo.Check.Readability.PredicateFunctionNames, []},
+          {Credo.Check.Readability.PreferImplicitTry, []},
+          {Credo.Check.Readability.RedundantBlankLines, []},
+          {Credo.Check.Readability.Semicolons, []},
+          {Credo.Check.Readability.SpaceAfterCommas, []},
+          {Credo.Check.Readability.StringSigils, []},
+          {Credo.Check.Readability.TrailingBlankLine, []},
+          {Credo.Check.Readability.TrailingWhiteSpace, []},
+          {Credo.Check.Readability.UnnecessaryAliasExpansion, []},
+          {Credo.Check.Readability.VariableNames, []},
+          {Credo.Check.Readability.WithSingleClause, []},
 
-        #
-        ## Warnings
-        #
-        {Credo.Check.Warning.BoolOperationOnSameValues},
-        {Credo.Check.Warning.ExpensiveEmptyEnumCheck},
-        {Credo.Check.Warning.IExPry},
-        {Credo.Check.Warning.IoInspect},
-        # can remove this because these are all lazy in Elixir 1.7.4
-        {Credo.Check.Warning.LazyLogging, false},
-        {Credo.Check.Warning.OperationOnSameValues},
-        {Credo.Check.Warning.OperationWithConstantResult},
-        {Credo.Check.Warning.UnusedEnumOperation},
-        {Credo.Check.Warning.UnusedFileOperation},
-        {Credo.Check.Warning.UnusedKeywordOperation},
-        {Credo.Check.Warning.UnusedListOperation},
-        {Credo.Check.Warning.UnusedPathOperation},
-        {Credo.Check.Warning.UnusedRegexOperation},
-        {Credo.Check.Warning.UnusedStringOperation},
-        {Credo.Check.Warning.UnusedTupleOperation},
-        {Credo.Check.Warning.RaiseInsideRescue},
+          #
+          ## Refactoring Opportunities
+          #
+          {Credo.Check.Refactor.Apply, []},
+          {Credo.Check.Refactor.CondStatements, []},
+          {Credo.Check.Refactor.CyclomaticComplexity, []},
+          {Credo.Check.Refactor.FilterCount, []},
+          {Credo.Check.Refactor.FilterFilter, []},
+          {Credo.Check.Refactor.FunctionArity, []},
+          {Credo.Check.Refactor.LongQuoteBlocks, []},
+          {Credo.Check.Refactor.MapJoin, []},
+          {Credo.Check.Refactor.MatchInCondition, []},
+          {Credo.Check.Refactor.NegatedConditionsInUnless, []},
+          {Credo.Check.Refactor.NegatedConditionsWithElse, []},
+          {Credo.Check.Refactor.Nesting, []},
+          {Credo.Check.Refactor.RedundantWithClauseResult, []},
+          {Credo.Check.Refactor.RejectReject, []},
+          {Credo.Check.Refactor.UnlessWithElse, []},
+          {Credo.Check.Refactor.WithClauses, []},
 
-        #
-        # Controversial and experimental checks (opt-in, just remove `, false`)
-        #
-        {Credo.Check.Refactor.ABCSize, false},
-        {Credo.Check.Refactor.AppendSingleItem, false},
-        {Credo.Check.Refactor.VariableRebinding, false},
-        {Credo.Check.Warning.MapGetUnsafePass, false},
-        {Credo.Check.Consistency.MultiAliasImportRequireUse, false},
+          #
+          ## Warnings
+          #
+          {Credo.Check.Warning.ApplicationConfigInModuleAttribute, []},
+          {Credo.Check.Warning.BoolOperationOnSameValues, []},
+          {Credo.Check.Warning.Dbg, []},
+          {Credo.Check.Warning.ExpensiveEmptyEnumCheck, []},
+          {Credo.Check.Warning.IExPry, []},
+          {Credo.Check.Warning.IoInspect, []},
+          {Credo.Check.Warning.MissedMetadataKeyInLoggerConfig, []},
+          {Credo.Check.Warning.OperationOnSameValues, []},
+          {Credo.Check.Warning.OperationWithConstantResult, []},
+          {Credo.Check.Warning.RaiseInsideRescue, []},
+          {Credo.Check.Warning.SpecWithStruct, []},
+          {Credo.Check.Warning.StructFieldAmount, []},
+          {Credo.Check.Warning.UnsafeExec, []},
+          {Credo.Check.Warning.UnusedEnumOperation, []},
+          {Credo.Check.Warning.UnusedFileOperation, []},
+          {Credo.Check.Warning.UnusedKeywordOperation, []},
+          {Credo.Check.Warning.UnusedListOperation, []},
+          {Credo.Check.Warning.UnusedPathOperation, []},
+          {Credo.Check.Warning.UnusedRegexOperation, []},
+          {Credo.Check.Warning.UnusedStringOperation, []},
+          {Credo.Check.Warning.UnusedTupleOperation, []},
+          {Credo.Check.Warning.WrongTestFileExtension, []}
+        ],
+        disabled: [
+          #
+          # Checks scheduled for next check update (opt-in for now)
+          {Credo.Check.Refactor.UtcNowTruncate, []},
 
-        #
-        # Deprecated checks (these will be deleted after a grace period)
-        #
-        {Credo.Check.Readability.Specs, false},
+          #
+          # Controversial and experimental checks (opt-in, just move the check to `:enabled`
+          #   and be sure to use `mix credo --strict` to see low priority checks)
+          #
+          {Credo.Check.Consistency.MultiAliasImportRequireUse, []},
+          {Credo.Check.Consistency.UnusedVariableNames, []},
+          {Credo.Check.Design.DuplicatedCode, []},
+          {Credo.Check.Design.SkipTestWithoutComment, []},
+          {Credo.Check.Readability.AliasAs, []},
+          {Credo.Check.Readability.BlockPipe, []},
+          {Credo.Check.Readability.ImplTrue, []},
+          {Credo.Check.Readability.MultiAlias, []},
+          {Credo.Check.Readability.NestedFunctionCalls, []},
+          {Credo.Check.Readability.OneArityFunctionInPipe, []},
+          {Credo.Check.Readability.OnePipePerLine, []},
+          {Credo.Check.Readability.SeparateAliasRequire, []},
+          {Credo.Check.Readability.SingleFunctionToBlockPipe, []},
+          {Credo.Check.Readability.SinglePipe, []},
+          {Credo.Check.Readability.Specs, []},
+          {Credo.Check.Readability.StrictModuleLayout, []},
+          {Credo.Check.Readability.WithCustomTaggedTuple, []},
+          {Credo.Check.Refactor.ABCSize, []},
+          {Credo.Check.Refactor.AppendSingleItem, []},
+          {Credo.Check.Refactor.DoubleBooleanNegation, []},
+          {Credo.Check.Refactor.FilterReject, []},
+          {Credo.Check.Refactor.IoPuts, []},
+          {Credo.Check.Refactor.MapMap, []},
+          {Credo.Check.Refactor.ModuleDependencies, []},
+          {Credo.Check.Refactor.NegatedIsNil, []},
+          {Credo.Check.Refactor.PassAsyncInTestCases, []},
+          {Credo.Check.Refactor.PipeChainStart, []},
+          {Credo.Check.Refactor.RejectFilter, []},
+          {Credo.Check.Refactor.VariableRebinding, []},
+          {Credo.Check.Warning.LazyLogging, []},
+          {Credo.Check.Warning.LeakyEnvironment, []},
+          {Credo.Check.Warning.MapGetUnsafePass, []},
+          {Credo.Check.Warning.MixEnv, []},
+          {Credo.Check.Warning.UnsafeToAtom, []}
 
-        {Credo.Check.Refactor.MapInto, false}
+          # {Credo.Check.Refactor.MapInto, []},
 
-        #
-        # Custom checks can be created using `mix credo.gen.check`.
-        #
-      ]
+          #
+          # Custom checks can be created using `mix credo.gen.check`.
+          #
+        ]
+      }
     }
   ]
 }
-
-# Generated by Elixir.Gaas.Generators.Simple.Credo

.formatter.exs

@@ -7,5 +7,3 @@ locals_without_parens = []
   export: [locals_without_parens: locals_without_parens],
   line_length: 80
 ]
-
-# Generated by Elixir.Gaas.Generators.Simple.Formatter

.github/settings.yml

@@ -105,5 +105,3 @@ branches:
         contexts: ["Bless"]
       enforce_admins: false
       restrictions: null
-
-# Generated by Elixir.Gaas.Generators.Simple.GithubSettings

.github/workflows/ci.yml

@@ -5,7 +5,7 @@ on: push
 jobs:
   bless:
     name: Bless
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     env:
       MIX_ENV: test
 
@@ -68,7 +68,7 @@ jobs:
 
   publish-hex-package:
     name: Publish Hex Package ⬆️☁️
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     if: startsWith(github.ref, 'refs/tags/v')
     env:
       MIX_ENV: dev
@@ -134,30 +134,7 @@ jobs:
     - name: Determine the repository name
       run: echo "REPOSITORY=$(echo $GITHUB_REPOSITORY | awk -F / '{print $2}')" >> $GITHUB_ENV
 
-    - name: Create a GitHub Release
-      id: create_release
-      uses: NFIBrokerage/create-release@v4
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      with:
-        tag_name: ${{ env.TAG }}
-        release_name: Release ${{ env.TAG }}
-        draft: false
-        prerelease: false
-
     - name: Publish library
       run: mix hex.publish --yes
       env:
         HEX_API_KEY: ${{ secrets.HEX_PUBLISH_KEY }}
-
-    - name: Notify ops channel of build success
-      run: >
-        curl
-        -X POST
-        -H 'Content-type:application/json'
-        -d "{\"text\":\"hex package published for $REPOSITORY $(git tag -ln $TAG)\"}"
-        $SLACK_WEBHOOK
-      env:
-        SLACK_WEBHOOK: ${{ secrets.OPS_CHANNEL_SLACK_WEBHOOK }}
-
-# Generated by Elixir.Gaas.Generators.Simple.Actions.LibraryCi

.github/workflows/refresh-dev-cache.yml

@@ -25,13 +25,10 @@ on:
 # Would like to run this as a scheduled workflow, but that is not currently
 # supported by the actions/cache action.
 
-env:
-  CUATRO_HEX_KEY: ${{ secrets.CUATRO_HEX_KEY }}
-
 jobs:
   refresh-dev-cache:
     name: Refresh Dev Cache
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     env:
       MIX_ENV: dev
 
@@ -74,7 +71,6 @@ jobs:
       run: |
         mix local.rebar --force
         mix local.hex --force
-        mix hex.organization auth cuatro --key $CUATRO_HEX_KEY
         mix deps.get
 
     - name: Compile dependencies
@@ -83,5 +79,3 @@ jobs:
 
     - name: Compile application
       run: mix compile
-
-# Generated by Elixir.Gaas.Generators.Simple.Actions.RefreshDevCache