RobotArmControl a MeArm V0.4 robot control library

Program for controlling a robot arm with 4 servos using 4 potentiometers and/or an IR Remote.

               

Smooth servo movements are controlled by the Servo easing library for Arduino.
Used in the "RobotArmControl" example of Arduino library ServoEasing.

If you find this library useful, please give it a star.

🌎 Google Translate

RobotArm	Control board	Instructable

Calibration

To calibrate your robot arm, open the Serial Monitor, move the arm manually and change the microsecond values for the PIVOT_MICROS_AT_*, LIFT_MICROS_AT_*, HORIZONTAL_MICROS_AT_* and CLAW_MICROS_AT_* positions in RobotArmServoConfiguration.h.

The example uses the EASE_USER_DIRECT easing type for all servos except the claw to implement movements by inverse kinematics.

Compile options / macros for this software

To customize the software to different requirements, there are some compile options / macros available.
Modify them by enabling / disabling them, or change the values if applicable.

Name	Default value	Description
ROBOT_ARM_HAS_IR_CONTROL	disabled	IR remote control is enabled.
ROBOT_ARM_HAS_RTC_CONTROL	disabled	A DS3231 is attached to the control.