From 677a3d2a4354a6f936a50f1461b6e0e0a1cadeea Mon Sep 17 00:00:00 2001
From: djdd87 <dan@djdd.co.uk>
Date: Fri, 1 Jan 2021 18:39:24 +0000
Subject: [PATCH] Update calibration.html

Corrected typo "Anythng else you have in your start gcode" to "Anything else you have in your start gcode"
---
 calibration.html | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/calibration.html b/calibration.html
index 410b5a0..0c26343 100644
--- a/calibration.html
+++ b/calibration.html
@@ -186,7 +186,7 @@ <h4>Additional start gcode</h4>
                     <li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
                     <li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
                     <li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
-                    <li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
+                    <li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
                 </ul>
                 <textarea name="startgcode"></textarea>
             </div>