diff --git a/andamiro/monitor/kortek-kt-3414dt.md b/andamiro/monitor/kortek-kt-3414dt.md
new file mode 100644
index 0000000..b589153
--- /dev/null
+++ b/andamiro/monitor/kortek-kt-3414dt.md
@@ -0,0 +1,150 @@
+# Kortek CRT monitors used on Pump It Up
+
+## Monitor capacitor repair kit for Kortek KT-2114, KT-2914 and KT-3414 series color monitors
+
+The following instructions are transcribed from a printout included in the repair kit from
+www.arcadesparepartsandrepair.com to replace capacitors on the aforementioned boards. You can order
+the full kit including these instructions at
+[www.arcadesparepartsandrepair.com](https://www.arcadepartsandrepair.com/store/components/capacitors/kortek-kt-2914-kt-2114-kt-3414-series-monitor-cap-kit-105c-nichicon/).
+
+Note that the kit does not include the
+[filter capacitor C114 220 uF @400V](https://www.arcadepartsandrepair.com/store/components/capacitors/snap-in-capacitor/220uf-400v-nichicon-105c-b-filter-capacitor/)
+and needs to be ordered separately.
+
+### Instructions - transcribed
+
+Our kits are designed for alll models within the series so there may be caps in this kit your
+specific model doesn't require, and if you have locations that never had caps installed then please
+research it or ask before populating the locations because your model probably doesn't use them.
+
+**The following parts are included with this kit:**
+
+* 9x 1 uF @ 50V
+* 3x 1 uF @ 100V BP
+* 1x 47 uF @ 250V
+* 5x 4.7 uF @ 50V
+* 2x 47 uF @ 50V
+* 6x 220 uF @ 50V
+* 1x 3.3 uF @ 50V
+* 6x 10 uF @ 50V
+* 3x 33 uF @ 50V
+* 1x 100 uF @ 50V
+* 3x 3.3 uF @ 50V BP
+* 2x 1000 uF @ 25V
+* 1x 22 uF @ 50V
+* 2x 10 uF @ 250V
+* 1x 100 uF @ 250V
+* 2x 47 uF @ 350V
+* 7x 470 uF @ 35V
+* 1x 100 uF @ 100V
+
+Be sure to install all of the parts on the monitor even though many of the original parts seem to be
+working fine. Age, humidity and temperature will cause the value of electrolytic capacitors to
+change. Installing all of the parts will assure many more years of trouble-free service.
+
+Each capacitor is polarized and should only be inserted in one direction. Be sure to watch the
+markings for polarity on each capacitor. On the top side of the monitor board where each capacitor
+is lcoated can have a positive sign (+)./ Insert the longer lead of each capacitor into the hole
+marked positive (+).
+
+Bi-Polar (BP) or Non-Polar (NP) capacitors have no specified polarity and are (Non-Polarized) and
+can be installed in either direction. Don't ever install a polirzed cap in a non-polarized cap
+location because a polarized cap can only handle current flow in ONE direction where a non-polarized
+cap can handle current flow in BOTH directions.
+
+**Make sure the game is unplugged and monitor discharged before installing the following parts at
+your own risk:**
+
+**Main Chassis PCB:**
+
+* C101 - 47 uF @ 250V
+* C112 - 1000 uF @ 25V
+* C113 - 1000 uF @ 25V
+* C118 - 470 uF @ 35V
+* C119 - 470 uF @ 35V
+* C123 - 33 uF @ 50V
+* C125 - 1 uF @ 50V
+* C126 - 100 uF @ 100V
+* C130 - 47 uF @ 350V
+* C135 - 470 uF @ 35V
+* C138 - 220 uF @ 50V
+* C139 - 1 uF @ 50V
+* C201 - 1 uF @ 50V
+* C203 - 470 uF @ 35V
+* C205 - 470 uF @ 35V
+* C206 - 220 uF @ 50V
+* C209 - 4.7 uF @ 50V
+* C302 - 4.7 uF @ 50V
+* C304 - 470 uF @ 35V
+* C305 - 470 uF @ 35V
+* C307 - 3.3 uF @ 50V BP
+* C310 - 1 uF @ 50V
+* C312 - 4.7 uF @ 50V
+* C401 - 4.7 uF @ 50V
+* C501 - 10 uF @ 50V
+* C503 - 10 uF @ 50V
+* C508 - 47 uF @ 50V
+* C509 - 10 uF @ 50V
+* C601 - 10 uF @ 50V
+* C602 - 100 uF @ 250V
+* C603 - 22 uF @ 50V
+* C607 - 47 uF @ 50V
+* C608 - 1 uF @ 50V
+* C614 - 220 uF @ 50V
+* C615 - 10 uF @ 250V
+* C617 - 33 uF @ 50V
+* C618 - 1 uF @ 50V
+* C620 - 3.3 uF @ 50V BP
+* C621 - 4.7 uF @ 50V
+* C622 - 3.3 uF @ 50V BP
+* C701 - 1 uF @ 50V
+* C708 - 1 uF @ 50V
+* C711 - 47 uF @ 350V
+* C721 - 10 uF @ 50V
+* C723 - 1 uF @ 50V
+* C724 - 33 uF @ 50V
+* C730 - 220 uF @ 50 V
+
+**Neck PCB:**
+
+* C801 - 100 uF @ 50 V
+* C801B - 1 uF @ 100V BP
+* C801G - 1 uF @ 100V BP
+* C801R - 1 uF @ 100V BP
+* C804 - 10 uF @ 250V
+* C810 - 220 uF @ 50V
+* C823 - 220 uF @ 50V
+* C834 - 3.3 uF @ 50V
+
+A good practice is to always remove old solder from all input headers and reflow new solder on them
+to eliminate cold solder joints. Make sure to do this with a connector on the pins otherwise when
+you heat them to remove the old solder the pins may drop out of the PCB and also the connector will
+keep the pins straight.
+
+**Be sure to double check your work before turning on the power.**
+
+**NOTE:** ON ALL CAPACITORS, YOU MAY USE A HIGHER VOLTAGE, BUT NEVER USE A LOWER VOLTAGE. OUR KITS
+MAY INCLUDE HIGHER VOLTAGE CAPACITORS!
+
+### Additional notes
+
+#### Filter cap
+
+C114 - 220 uF @ 400V
+
+#### Unused caps on In The Groove KT-3414DF
+
+The following caps are not populated:
+
+* C130
+* C139
+* C209
+* C305
+* C401
+
+Do not populate them as they are not required.
+
+#### Swapped out caps to incrase picture brightness (?)
+
+* C711 swapped with 10 uF @ 350 V instead of 47 uF @ 350 V
+* C603 swapped with 10 uF @ 50 V instead of 22 uf @ 50 V
\ No newline at end of file