OpenOCD doesn't display "Info : Listening"

[clementperon]

Hi, in the extension you check for
"Info : Listening"
but sometimes not sure why OpenOCD doesn't show this info for example with STM32 Nucleo board.

$> openocd -f board/st_nucleo_l0.cfg 
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
adapter speed: 300 kHz
adapter_nsrst_delay: 100
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
none separate
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : Unable to match requested speed 300 kHz, using 240 kHz
Info : Unable to match requested speed 300 kHz, using 240 kHz
Info : clock speed 240 kHz
Info : STLINK v2 JTAG v32 API v2 SWIM v22 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 3.265135
Info : stm32l0.cpu: hardware has 4 breakpoints, 2 watchpoints