Intel(R) Xeon(R) D-2166NT CPU @ 2.00GHz QAT Drivers #295
Description
Hi all,
I am trying to upgrade QAT drivers QAT.L.4.20.0-00001.tar.gz to latest QAT.L.4.24.0-00005.tar.gz and I get the following errors during make
In file included from /home/pxcghost/QAT/quickassist/qat/drivers/crypto/qat/qat_common/adf_ctl_drv.c:15:
./include/crypto/algapi.h:259:20: error: redefinition of ‘crypto_request_complete’
259 | static inline void crypto_request_complete(struct crypto_async_request *req,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from <command-line>:
/home/pxcghost/QAT/quickassist/qat/compat/qat_compat.h:514:20: note: previous definition of ‘crypto_request_complete’ with type ‘void(struct crypto_async_request *, int)’
514 | static inline void crypto_request_complete(struct crypto_async_request *req,`
Some input from the driver team would be appreciated, I do have QAT_Engine installed with the driver QAT.L.4.20.0-00001.tar.gz on the D2166NT but I have an error running below
openssl speed -engine qatengine -elapsed -async_jobs 8 rsa2048
Engine "qatengine" set.
You have chosen to measure elapsed time instead of user CPU time.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
[error] LacPke_MsgCallback() - : The slice hang error is detected on the MMP slice.
cpuid -1 | egrep 'VAES|VPCLM|GFNI|AVX512F|AVX512IFMA'
AVX512F: AVX-512 foundation instructions = true
AVX512IFMA: fused multiply add = false
GFNI: Galois Field New Instructions = false
VAES instructions = false
VPCLMULQDQ instruction = false
openssl engine -t -c -v qatengine
(qatengine) Reference implementation of QAT crypto engine(qat_hw) v1.5.0
[RSA, AES-128-CBC-HMAC-SHA256, AES-256-CBC-HMAC-SHA256, id-aes128-CCM, id-aes192-CCM, id-aes256-CCM, TLS1-PRF, X25519, X448]
[ available ]
LacDh_StatsFree() - : DH algorithm is not supported
LacDsa_StatsFree() - : DSA algorithm is not supported
ENABLE_EXTERNAL_POLLING, POLL, SET_INSTANCE_FOR_THREAD,
GET_NUM_OP_RETRIES, SET_MAX_RETRY_COUNT, SET_INTERNAL_POLL_INTERVAL,
GET_EXTERNAL_POLLING_FD, ENABLE_EVENT_DRIVEN_POLLING_MODE,
GET_NUM_CRYPTO_INSTANCES, DISABLE_EVENT_DRIVEN_POLLING_MODE,
SET_EPOLL_TIMEOUT, SET_CRYPTO_SMALL_PACKET_OFFLOAD_THRESHOLD,
ENABLE_INLINE_POLLING, ENABLE_HEURISTIC_POLLING,
GET_NUM_REQUESTS_IN_FLIGHT, INIT_ENGINE, SET_CONFIGURATION_SECTION_NAME,
ENABLE_SW_FALLBACK, HEARTBEAT_POLL, DISABLE_QAT_OFFLOAD, HW_ALGO_BITMAP`
sudo lspci | grep -i 'co-processor' b5:00.0 Co-processor: Intel Corporation C62x Chipset QuickAssist Technology (rev 04) b6:00.0 Co-processor: Intel Corporation C62x Chipset QuickAssist Technology (rev 04)
lsmod | grep qat
qat_c62x 20480 0
intel_qat 315392 2 qat_c62x,usdm_drv
qat_contig_mem 16384 0
uio 20480 11 intel_qat,igb_uio,uio_pci_generic
sudo dmesg | grep iommu
[13322.140880] QDM: iommu_pass_through is set to 0
[13751.125730] QDM: iommu_pass_through is set to 0
I had the same issue with C3958 and resolved by rolling back to QAT.L.4.18.1-00001 and for now is stable pending a stable path to upgrade QAT Driver.
Any guidance as always welcomed and appreciated.