Having problems in P2PMQTT.h

[YushaBinArif]

Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"

Wrox_AOA_c8p1_Basic_Robot:52: error: 'P2PMQTT' does not name a type

P2PMQTT mqtt(true); // add parameter true for debugging

^

E:\arduino-1.8.5\libraries\AOA_code\Wrox_AOA_c8p1_Basic_Robot\Wrox_AOA_c8p1_Basic_Robot.ino: In function 'void setup()':

Wrox_AOA_c8p1_Basic_Robot:60: error: 'mqtt' was not declared in this scope

mqtt.begin("Basic Robot");

^

E:\arduino-1.8.5\libraries\AOA_code\Wrox_AOA_c8p1_Basic_Robot\Wrox_AOA_c8p1_Basic_Robot.ino: In function 'void loop()':

Wrox_AOA_c8p1_Basic_Robot:70: error: 'mqtt' was not declared in this scope

int type = mqtt.getType(mqtt.buffer);

          ^

Wrox_AOA_c8p1_Basic_Robot:75: error: 'CONNECT' was not declared in this scope

 case CONNECT:

      ^

Wrox_AOA_c8p1_Basic_Robot:79: error: 'PUBLISH' was not declared in this scope

 case PUBLISH:

      ^

exit status 1
'P2PMQTT' does not name a type

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

///
These are the errors i am having while importing P2PMQTT.h in my arduino code

[agoransson]

Can you include your sketch please?

[YushaBinArif]

Yes here it is

/// sketch
#include <AndroidAccessory.h>
#include <P2PMQTT.h>
int payload = -1;
P2PMQTT mqtt(true); // add parameter true for debugging
void setup() {
// use the serial port to monitor that things work
Serial.begin(9600);
Serial.println("ready");
mqtt.connect(0,60000); // add 1min timeout

// initiate the communication to the phone
mqtt.begin("Basic Robot");
}
// to store the data

void loop() {
// get a P2PMQTT package and extract the type
int type = mqtt.getType(mqtt.buffer);
// depending on the package type do different things
switch(type) {
case CONNECT:
Serial.println("connected");
break;
case PUBLISH:
payload = mqtt.getPayload(mqtt.buffer, type)[0];
Serial.print("command: ");
Serial.println(payload);
break;
default:
// do nothing
break;
}
}

[YushaBinArif]

I first unzipped the files in "libraries" directory where all the default libraries of arduino are present, then wrote the above code.