Liquid Menu no matching function

[Gaby2414]

Hi, I have a problem. The code im programming doesn´t compile. It continues to show this error: no matching function for call to 'LiquidMenu::LiquidMenu(LiquidCrystal_I2C&, LiquidScreen&, LiquidScreen&, LiquidScreen&, LiquidScreen&, LiquidScreen&)'.

At the beggining I thought it was me, but I tried with others people codes and it says the same thing. I tried to check if there was something that i needed to change but i haven´t been able to find information about it. I´ll appreciate all your help.

Here is the code:

#include <LiquidCrystal.h>
#include <LiquidMenu.h>


LiquidCrystal lcd(4,5,6,7,8,9);
int pulsadorarriba=0;
int pulsadorabajo=0;
int contador = 0;
int bset=0;
int pin=0;

LiquidLine linea1(1, 0, "ENCENDER LUZ");
LiquidLine linea2(1, 1, "ENCENDER UV");
LiquidLine linea3(1, 2, "ENCENDER ABANICO");
LiquidLine linea4(1, 3, "HABILITAR ENERGIA");
LiquidScreen pantalla1;

LiquidLine linea1_1(1, 0, "TIEMPO LUZ");
LiquidLine linea1_2(1, 1, "MINUTOS: ");
LiquidLine linea1_33(1, 2, "APAGAR");
LiquidLine linea1_3(1, 3, "REGRESAR");
LiquidScreen pantalla11;

LiquidLine linea2_1(1, 0, "TIEMPO UV");
LiquidLine linea2_2(1, 1, "MINUTOS: ");
LiquidLine linea2_33(1, 2, "APAGAR");
LiquidLine linea2_3(1, 3, "REGRESAR");
LiquidScreen pantalla2;

LiquidLine linea3_1(1, 0, "ENCENDER ABANICO");
LiquidLine linea3_2(1, 1, "CON TIEMPO");
LiquidLine linea3_3(1, 2, "SIN TIEMPO");
LiquidLine linea3_33(1, 3, "APAGAR");
LiquidLine linea3_4(1, 0, "REGRESAR");
LiquidScreen pantalla3;

LiquidLine linea4_1(1, 0, "HABILITAR ENERGIA");
LiquidLine linea4_2(1, 1, "ENCENDER");
LiquidLine linea4_3(1, 2, "APAGAR");
LiquidLine linea4_4(1, 3, "REGRESAR");
LiquidScreen pantalla4;

//LiquidMenu menu(lcd, pantalla1);



void setup() 
{

//  lcd.begin(20,4);
//  lcd.setCursor(0,0);
//  lcd.print("Ciclo limpieza");
  pinMode(13,OUTPUT);
  pinMode(10,INPUT);
  pinMode(11,OUTPUT);
  pinMode(1,OUTPUT);
//LCD MENU
  
  lcd.begin(20, 4);


  linea1.set_focusPosition(Position::LEFT);
  linea2.set_focusPosition(Position::LEFT);
  linea3.set_focusPosition(Position::LEFT);
  linea4.set_focusPosition(Position::LEFT);

  linea1.attach_function(1, fn_PANT1); 
  linea2.attach_function(1, fn_PANT2);
  linea3.attach_function(1, fn_PANT3);
  linea4.attach_function(1, fn_PANT4);
  menu.add_screen(pantalla1);

  linea1_1.set_focusPosition(Position::LEFT);
  linea1_2.set_focusPosition(Position::LEFT);
  linea1_33.set_focusPosition(Position::LEFT);
  linea1_3.set_focusPosition(Position::LEFT);

  linea1_2.attach_function(1, fn_MIN);
  linea1_33.attach_function(1, fn_OFF);
  linea1_3.attach_function(1, fn_BACK);
  menu.add_screen(pantalla11);

  linea2_1.set_focusPosition(Position::LEFT);
  linea2_2.set_focusPosition(Position::LEFT);
  linea2_33.set_focusPosition(Position::LEFT);
  linea2_3.set_focusPosition(Position::LEFT);

  linea2_2.attach_function(1, fn_MIN);
  linea2_33.attach_function(1, fn_OFF);
  linea2_3.attach_function(1, fn_BACK);
  menu.add_screen(pantalla2);

  linea3_1.set_focusPosition(Position::LEFT);
  linea3_2.set_focusPosition(Position::LEFT);
  linea3_33.set_focusPosition(Position::LEFT);
  linea3_3.set_focusPosition(Position::LEFT);
  linea3_4.set_focusPosition(Position::LEFT);


  linea3_2.attach_function(1, fn_MIN);
  linea3_33.attach_function(1, fn_STIEM);
  linea3_3.attach_function(1, fn_OFF);
  linea3_4.attach_function(1, fn_BACK);
  menu.add_screen(pantalla3);

  linea4_1.set_focusPosition(Position::LEFT);
  linea4_2.set_focusPosition(Position::LEFT);
  linea4_3.set_focusPosition(Position::LEFT);
  linea4_4.set_focusPosition(Position::LEFT);

  linea4_2.attach_function(1, fn_ON);
  linea4_3.attach_function(1, fn_OFF);
  linea4_4.attach_function(1, fn_BACK);
  menu.add_screen(pantalla4);


  pantalla1.add_line(linea1);
  pantalla1.add_line(linea2);
  pantalla1.add_line(linea3);
  pantalla1.add_line(linea4);

  pantalla11.add_line(linea1_1);
  pantalla11.add_line(linea1_2);
  pantalla11.add_line(linea1_33);
  pantalla11.add_line(linea1_3);

  pantalla2.add_line(linea2_1);
  pantalla2.add_line(linea2_2);
  pantalla2.add_line(linea2_33);
  pantalla2.add_line(linea2_3);

  pantalla3.add_line(linea3_1);
  pantalla3.add_line(linea3_2);
  pantalla3.add_line(linea3_33);
  pantalla3.add_line(linea3_3);
  pantalla3.add_line(linea3_4);

  pantalla4.add_line(linea4_1);
  pantalla4.add_line(linea4_2);
  pantalla4.add_line(linea4_3);
  pantalla4.add_line(linea4_4);

  menu.add_screen(pantalla1, pantalla11, pantalla2, pantalla3, pantalla4);
  pantalla1.set_displayLineCount(4);
  pantalla11.set_displayLineCount(4);
  pantalla2.set_displayLineCount(4);
  pantalla3.set_displayLineCount(4);
  pantalla4.set_displayLineCount(4);

  menu.set_focusedLine(0);

  menu.update();

}

void loop() {
  // put your main code here, to run repeatedly:
  float sen1=analogRead(A0);
  pulsadorarriba = digitalRead(2);   //lee el estado del botón  
  pulsadorabajo = digitalRead(3);   //lee el estado del botón  
  bset = digitalRead(10);
  selectOption();
      
}
void selectOption(){
if(digitalRead(bset)==HIGH){
  Serial.println("boton");
  menu.call_function(1);
  delay(500);  
  }
}
void fn_PANT1(){
  menu.change_screen(2);
  menu.set_focusedLine(0);
  pin=1;    
}
void fn_PANT2(){
  menu.change_screen(3);
  menu.set_focusedLine(0);
  pin=2;    
}
void fn_PANT3(){
  menu.change_screen(4);
  menu.set_focusedLine(0);
  pin=3;    
}
void fn_PANT4(){
  menu.change_screen(5);
  menu.set_focusedLine(0);
  pin=4;    
}

void fn_MIN(){
  pulsadorarriba = digitalRead(2);   //lee el estado del botón  
  pulsadorabajo = digitalRead(3);   //lee el estado del botón  
  bset = digitalRead(10);  
  
  switch(pin){
    case 1: //luz  
      if(pulsadorarriba==HIGH){    
        contador++;       
      }
      if(pulsadorabajo==HIGH){
      contador--;
      }
      lcd.setCursor(10,1);  
      lcd.print(contador);    
      delay(100);
      if (contador >=1 && bset== HIGH)
      {
        digitalWrite(12,HIGH);
        delay(contador*1000); 
        digitalWrite(12,LOW);
        delay(1000);
        contador=0;
      }
      else 
      {
        digitalWrite(12,LOW);
      }   
      break;
    case 2: //uv
      if(pulsadorarriba==HIGH) 
      {    
        contador++;       
      }
      if(pulsadorabajo==HIGH)
      {
        contador--;
      }
      lcd.setCursor(10,1);  
      lcd.print(contador);    
      delay(100);
      if (contador >=1 && bset== HIGH)
      {
        digitalWrite(11,HIGH);
        delay(contador*1000); 
        digitalWrite(11,LOW);
        delay(1000);
        contador=0;
      }
      else 
      { 
        digitalWrite(11,LOW);
      } 
      break;
    case 3: //abanico
      if(pulsadorarriba==HIGH) 
      {    
        contador++;       
      }
      if(pulsadorabajo==HIGH)
      {
        contador--;
      }
      lcd.setCursor(10,1);
      lcd.print(contador);    
      delay(100);
      if (contador >=1 && bset==HIGH)
      {
        digitalWrite(13,HIGH);
        delay(contador*1000); 
        digitalWrite(13,LOW);
        delay(1000);
        contador=0;
      }
      else 
      {
        digitalWrite(13,LOW);
      }
      break;
 }
}

void fn_BACK(){

  switch(pin){
    case 1:
        menu.change_screen(1);  
        menu.set_focusedLine(0);
      break;
    case 2:
        menu.change_screen(1);  
        menu.set_focusedLine(0);
      break;
    case 3:
        menu.change_screen(1);  
        menu.set_focusedLine(0);
      break;
    case 4:
        menu.change_screen(1);  
        menu.set_focusedLine(0);
      break;
  }
}
void fn_STIEM(){
  switch(pin){
    case 1:
      digitalWrite(13,HIGH);
      break;
  }
}
void fn_OFF(){
  switch(pin){
    case 1:
      digitalWrite(12, LOW);
      break;
    case 2:
      digitalWrite(11, LOW);
      break;
    case 3:
      digitalWrite(13, LOW);
      break;
    case 4:
      digitalWrite(1, LOW);
      break;
  }
}

void fn_ON(){
  digitalWrite(1, HIGH);
}

[VasilKalchev]

It seems that you're using the display in parallel mode, but the library is configured for I2C mode. Check the configuration in LiquidMenu_config.h. Please refer to this discussion.