for kernel 6.17.0-6-generic ubuntu 25.10

[electroniumez]

Can I use this driver on 6.17 kernel version?
are those structure of how to install are same in this kernel too?
Laptop: X1504VA

[OnlineLearningTutorials]

linux-6.17 kernel version is added. Check if bluetooth is working properly

[electroniumez]

thank you so much
but I'm out of time, I'll check it in satureday

[Saekoboyy]

I'm running the same version of the kernel and ubuntu, trying to install but might be too stupid to figure out how.

Edit: Yup too stupid (does the same thing with sudo)

[OnlineLearningTutorials]

for kernel 6.17 to run the bluetooth of mt7902
go to mt7902_temp/linux-6.17/drivers/bluetooth folder
and then run make command.
This will create two modules btmtk.ko and btusb.ko.
remove kernel driver btmtk and btusb and install the compiled btmtk.ko and btusb.ko by using command

sudo rmmod btusb 
sudo rmmod btmtk

sudo insmod btmtk.ko
sudo insmod btusb.ko

For ubuntu, if you want to permanently set mt7902 bluetooth.
Then convert btmtk.ko and btusb.ko to btmtk.ko.zst and btusb.ko.zst by using command

zstd btusb.ko
zstd btmtk.ko

Now check in your system directory /lib/modules/6.17.0-061600-generic/kernel/drivers/bluetooth replace 6.17.0-061600-generic with your own version of kernel.
Check if there btmtk.ko.zst and btusb.ko.zst file exists.
replace those files with the compiled btmtk.ko.zst and btusb.ko.zst.
Now every time system start bluetooth automatically working.

[Saekoboyy]

for kernel 6.17 to run the bluetooth of mt7902 go to mt7902_temp/linux-6.17/drivers/bluetooth folder and then run make command.

I did this, but make tells me no targets:

[OnlineLearningTutorials]

update git repo git pull and
check now

[Saekoboyy]

update git repo git pull and check now

Done, ran make in mt7902_temp/linux-6.17/drivers/bluetooth, and this error popped up: (what am I doing wrong lol)

[OnlineLearningTutorials]

Google answer

The "generated/autoconf.h not found" error typically indicates that the kernel source directory you are using is not properly configured for building, or that the necessary kernel headers are missing or outdated. This file is crucial for kernel module compilation and is generated during the kernel build preparation process.
Here are the primary solutions to address this issue: Prepare the Kernel Source.
This is the most common solution. Navigate to your kernel source directory (e.g., /usr/src/linux-headers-$(uname -r)) and execute the following commands:
Code

make oldconfig
make prepare

make oldconfig configures the kernel based on an existing .config file, while make prepare sets up the necessary header files and other build infrastructure, including generated/autoconf.h.

[Saekoboyy]

also didn't work, but ima just get out of y'alls hair at this point, thx for trying to help me

[dubhater]

What does lsusb say for y'all? My card uses the ID 0e8d:1ede. I will send a patch to the linux-bluetooth mailing list. Someone already tried in January and got no reply, but let's try again.

[peopeyes]

I installed the firmware, rebooted, and then went to mt7902_temp/linux-6.17/drivers/bluetooth and did make and loaded the modules. My bluetooth doesent seem to quite work, dmesg just says

[    3.745100] amdgpu 0000:0b:00.0: amdgpu: [drm] Loading DMUB firmware via PSP: version=0x05002A00
[    3.745490] amdgpu 0000:0b:00.0: amdgpu: Found VCN firmware Version ENC: 1.33 DEC: 4 VEP: 0 Revision: 13
[    4.749700] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    5.209404] Bluetooth: Core ver 2.22
[    5.209420] NET: Registered PF_BLUETOOTH protocol family
[    5.209421] Bluetooth: HCI device and connection manager initialized
[    5.209424] Bluetooth: HCI socket layer initialized
[    5.209426] Bluetooth: L2CAP socket layer initialized
[    5.209429] Bluetooth: SCO socket layer initialized
[    6.829332] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.829335] Bluetooth: BNEP filters: protocol multicast
[    6.829337] Bluetooth: BNEP socket layer initialized
[    7.270307] Bluetooth: hci0: Opcode 0x0c03 failed: -110
[  113.900873] Bluetooth: hci0: Opcode 0x0c03 failed: -110
[  644.853097] Bluetooth: hci0: Opcode 0x0c03 failed: -110
[  674.294496] Bluetooth: hci0: Opcode 0x0c03 failed: -110

Not sure what i am doing wrong

[OnlineLearningTutorials]

@peopeyes give me output of command

cat /sys/kernel/debug/usb/devices

[Adnan-Safdari]

is there a working version right now or is it still in progress?

[peopeyes]

@peopeyes give me output of command

cat /sys/kernel/debug/usb/devices

@OnlineLearningTutorials

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh=12
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:09:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 13 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04e8 ProdID=6863 Rev= 2.23
S:  Manufacturer=SAMSUNG
S:  Product=SAMSUNG_Android
S:  SerialNumber=R9ZY60MH2QD
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1532 ProdID=0098 Rev= 2.00
S:  Manufacturer=Razer
S:  Product=Razer DeathAdder Essential
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=1ms

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=04d9 ProdID=a1cd Rev= 2.01
S:  Manufacturer=HT
S:  Product=CB-GK-16 Firefly
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl=1ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=4ms
E:  Ad=04(O) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=85(I) Atr=03(Int.) MxPS=   8 Ivl=1ms

T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0b05 ProdID=19af Rev= 1.00
S:  Manufacturer=AsusTek Computer Inc.
S:  Product=AURA LED Controller
S:  SerialNumber=9876543210
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 16mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:* If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=10000 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.10 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:09:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0b:00.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=10000 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.10 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0b:00.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0b:00.4
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=10000 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.10 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0b:00.4
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0c:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3596 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

T:  Bus=08 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 0
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.17
S:  Manufacturer=Linux 6.17.7-2-cachyos xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:0c:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

[OnlineLearningTutorials]

@peopeyes your bluetooth id is added in this repo. check now, update repo and recompile driver