[Framework 16 7840hs] Port 5 loses connection until reseated

[knipp30]

Device Information

FW16
7850hs
7700s
Port 5 USB A expansion card

Please select one of the following

• [X ] Framework Laptop 16 (AMD Ryzen™ 7040 Series)

BIOS VERSION

Please provide the bios version.
4.0.3
(Issue observed on past releases)

Port/Peripheral information

If you are experiencing an issue with a peripheral or an expansion card/port please fill out the following information:

• Peripheral vendor and name.

• ANY USB port in port number 5

• Port the Peripheral was connected to. Please see the following for port numbering: Laptop 16 or Laptop 13

• Port 5

• Device or expansion card attached to the Adjacent port to the port that is having the issue.

1. USB C - used for power delivery
2. USB A - empty

Standalone Operation

Are you running your mainboard as a standalone device. Is standalone mode enabled in the BIOS?

• Yes
• [X ] No

Describe the bug

A clear and concise description of what the bug is.

After the laptop enters a sleep state, power to port 5 is lost. The connected device no longer registers until the expansion card is reseated.

If nothing is in port 5, and you plug something into port 5, it will cause the keyboard, numpad, touchpad, and power to all cycle off for a moment, an overcurrent error is seen in the logs, and the port does not work until the expansion card is reseated.

Steps To Reproduce

Steps to reproduce the behavior:

1. Power on laptop, observe port 5 works
2. Let the laptop sleep (come back to it after an hour or so)
3. Try and plug something into port 5, where port 5 is using a USB A expansion card

Expected behavior

A clear and concise description of what you expected to happen.
Ports shouldnt disconnect.

Screenshots

If applicable, add screenshots to help explain your problem.
N/A - to mitigate this, I have placed a 250gb expansion card in this slot, it does not seem to have this issue. Will replace with a USB A port if needed for logs.

Operating System (please complete the following information):

• OS/Distribution: Fedora
• Version: 43
• Linux Kernel Version:

BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.18.2-cachyos1.fc43.x86_64 root=UUID=xxxxxxxxxx ro rootflags=subvol=root rhgb quiet amdgpu.ppfeaturemask=0xffffffff amdgpu.freesync_video=1 amdgpu.dcdebugmask=0x410

Additional context

Add any other context about the problem here.
I can readily reproduce this with any of the usb A ports in my collection of usb A ports. Moving the same card to another slot does not move the issue. This only happens on port 5 - I believe I can also reproduce this with the 3.5mm expansion card and usb c cards - but have not tested to that extent.