diff --git a/install.bat b/install.bat
new file mode 100644
index 0000000..28b7660
--- /dev/null
+++ b/install.bat
@@ -0,0 +1,205 @@
+@echo off
+REM WiFi Auto Auth Installation Script
+REM This script installs and configures WiFi Auto Auth service
+
+REM Check for administrator privileges
+net session >nul 2>&1
+if %errorLevel% neq 0 (
+    echo This script requires administrator privileges.
+    echo Please right-click and select "Run as administrator"
+    pause
+    exit /b 1
+)
+
+echo ========================================
+echo WiFi Auto Auth Installation Script
+echo ========================================
+echo.
+
+REM Get the current script directory
+set "INSTALL_DIR=%~dp0"
+set "INSTALL_DIR=%INSTALL_DIR:~0,-1%"
+
+echo Installation directory: %INSTALL_DIR%
+echo.
+
+REM Check if Python 3.x is installed
+echo Checking for Python 3.x installation...
+python --version >nul 2>&1
+if %errorLevel% neq 0 (
+    echo ERROR: Python is not installed or not in PATH
+    echo Please install Python 3.x from https://www.python.org/downloads/
+    pause
+    exit /b 1
+)
+
+REM Verify Python version is 3.x
+for /f "tokens=2" %%i in ('python --version 2^>^&1') do set PYTHON_VERSION=%%i
+for /f "tokens=1 delims=." %%a in ("%PYTHON_VERSION%") do set PYTHON_MAJOR=%%a
+
+if %PYTHON_MAJOR% LSS 3 (
+    echo ERROR: Python 3.x or higher is required. Found Python %PYTHON_VERSION%
+    pause
+    exit /b 1
+)
+
+echo Python %PYTHON_VERSION% detected successfully
+echo.
+
+REM Install required Python packages from requirements.txt
+echo Installing required Python packages from requirements.txt...
+pip install -r "%INSTALL_DIR%\requirements.txt"
+if %errorLevel% neq 0 (
+    echo ERROR: Failed to install packages from requirements.txt
+    pause
+    exit /b 1
+)
+echo Python packages installed successfully
+echo.
+
+REM Create necessary directories
+echo Creating necessary directories...
+
+if not exist "%INSTALL_DIR%\config" (
+    mkdir "%INSTALL_DIR%\config"
+    echo Created config directory
+)
+
+if not exist "%INSTALL_DIR%\logs" (
+    mkdir "%INSTALL_DIR%\logs"
+    echo Created logs directory
+)
+
+if not exist "%INSTALL_DIR%\data" (
+    mkdir "%INSTALL_DIR%\data"
+    echo Created data directory
+)
+
+echo.
+
+REM Interactive configuration setup
+echo ========================================
+echo Configuration Setup
+echo ========================================
+echo.
+
+set /p WIFI_SSID="Enter WiFi SSID (network name): "
+set /p WIFI_USERNAME="Enter WiFi username/ID: "
+set /p WIFI_PASSWORD="Enter WiFi password: "
+set /p PORTAL_URL="Enter authentication portal URL: "
+
+echo.
+echo Creating configuration file...
+
+REM Create config.json file
+(
+echo {
+echo   "wifi": {
+echo     "ssid": "%WIFI_SSID%",
+echo     "username": "%WIFI_USERNAME%",
+echo     "password": "%WIFI_PASSWORD%"
+echo   },
+echo   "portal": {
+echo     "url": "%PORTAL_URL%",
+echo     "timeout": 30
+echo   },
+echo   "logging": {
+echo     "enabled": true,
+echo     "log_file": "logs/wifi_auto_auth.log",
+echo     "level": "INFO"
+echo   }
+echo }
+) > "%INSTALL_DIR%\config\config.json"
+
+echo Configuration file created at: %INSTALL_DIR%\config\config.json
+echo.
+
+REM Set up scheduled task (Windows equivalent of cron job)
+echo ========================================
+echo Scheduled Task Setup
+echo ========================================
+echo.
+set /p SETUP_TASK="Do you want to set up automatic execution on startup and network changes? (Y/N): "
+
+if /i "%SETUP_TASK%"=="Y" (
+    echo.
+    echo Creating scheduled tasks...
+    
+    REM Create a scheduled task to run on startup
+    schtasks /create /tn "WiFiAutoAuth" /tr "python \"%INSTALL_DIR%\wifi_auto_auth.py\"" /sc onlogon /rl highest /f >nul 2>&1
+    if %errorLevel% equ 0 (
+        echo [OK] Startup task created successfully
+    ) else (
+        echo [WARNING] Failed to create startup task
+    )
+    
+    REM Create a task to run on network state change
+    schtasks /create /tn "WiFiAutoAuthOnNetwork" /tr "python \"%INSTALL_DIR%\wifi_auto_auth.py\"" /sc onevent /ec System /mo "*[System[Provider[@Name='Microsoft-Windows-NetworkProfile'] and EventID=10000]]" /rl highest /f >nul 2>&1
+    if %errorLevel% equ 0 (
+        echo [OK] Network event task created successfully
+    ) else (
+        echo [WARNING] Failed to create network event task
+    )
+    
+    echo.
+    echo Scheduled tasks have been configured.
+) else (
+    echo Skipping scheduled task setup.
+    echo You can manually run: python wifi_auto_auth.py
+)
+
+echo.
+
+REM Set proper file permissions
+echo ========================================
+echo Setting File Permissions
+echo ========================================
+echo.
+
+REM Set restrictive permissions on config directory (Windows NTFS permissions)
+icacls "%INSTALL_DIR%\config" /inheritance:r /grant:r "%USERNAME%:(OI)(CI)F" /t >nul 2>&1
+if %errorLevel% equ 0 (
+    echo [OK] Config directory permissions set (accessible only by current user)
+) else (
+    echo [WARNING] Could not set restrictive permissions on config directory
+)
+
+REM Set permissions on logs directory
+icacls "%INSTALL_DIR%\logs" /grant "%USERNAME%:(OI)(CI)M" >nul 2>&1
+if %errorLevel% equ 0 (
+    echo [OK] Logs directory permissions set
+) else (
+    echo [WARNING] Could not set permissions on logs directory
+)
+
+echo.
+
+REM Final summary
+echo ========================================
+echo Installation Complete!
+echo ========================================
+echo.
+echo Summary:
+echo   - Python %PYTHON_VERSION% verified
+echo   - Required packages installed
+echo   - Directories created: config, logs, data
+echo   - Configuration file created
+echo   - File permissions configured
+if /i "%SETUP_TASK%"=="Y" (
+    echo   - Scheduled tasks configured
+)
+echo.
+echo Installation directory: %INSTALL_DIR%
+echo Configuration file: %INSTALL_DIR%\config\config.json
+echo Log file: %INSTALL_DIR%\logs\wifi_auto_auth.log
+echo.
+echo Next steps:
+echo   1. Review configuration in config\config.json
+echo   2. Test the script: python wifi_auto_auth.py
+if /i NOT "%SETUP_TASK%"=="Y" (
+    echo   3. Run install.bat again to set up scheduled tasks
+)
+echo.
+echo To uninstall, run: uninstall.bat
+echo.
+pause
\ No newline at end of file
diff --git a/install.sh b/install.sh
new file mode 100644
index 0000000..aa06acc
--- /dev/null
+++ b/install.sh
@@ -0,0 +1,244 @@
+#!/bin/bash
+
+# WiFi Auto Auth Installation Script
+# This script installs and configures WiFi Auto Auth service
+
+set -e  # Exit on any error
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[0;34m'
+NC='\033[0m' # No Color
+
+# Check if running as root (for system-wide installation)
+check_root() {
+    if [[ $EUID -eq 0 ]]; then
+        echo -e "${YELLOW}Warning: Running as root. This will install system-wide.${NC}"
+        return 0
+    else
+        echo -e "${BLUE}Running as regular user. Installing to user directory.${NC}"
+        return 1
+    fi
+}
+
+echo "========================================"
+echo "WiFi Auto Auth Installation Script"
+echo "========================================"
+echo
+
+# Get the current script directory
+INSTALL_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+echo "Installation directory: $INSTALL_DIR"
+echo
+
+# Check if Python 3.x is installed
+echo "Checking for Python 3.x installation..."
+if ! command -v python3 &> /dev/null; then
+    echo -e "${RED}ERROR: Python 3 is not installed${NC}"
+    echo "Please install Python 3.x using your package manager:"
+    echo "  Ubuntu/Debian: sudo apt update && sudo apt install python3 python3-pip"
+    echo "  CentOS/RHEL: sudo yum install python3 python3-pip"
+    echo "  Fedora: sudo dnf install python3 python3-pip"
+    echo "  Arch Linux: sudo pacman -S python python-pip"
+    echo "  macOS: brew install python3"
+    exit 1
+fi
+
+# Get Python version
+PYTHON_VERSION=$(python3 --version 2>&1 | awk '{print $2}')
+PYTHON_MAJOR=$(echo $PYTHON_VERSION | cut -d. -f1)
+
+if [[ $PYTHON_MAJOR -lt 3 ]]; then
+    echo -e "${RED}ERROR: Python 3.x or higher is required. Found Python $PYTHON_VERSION${NC}"
+    exit 1
+fi
+
+echo -e "${GREEN}Python $PYTHON_VERSION detected successfully${NC}"
+echo
+
+# Check if pip3 is available
+if ! command -v pip3 &> /dev/null; then
+    echo -e "${RED}ERROR: pip3 is not installed${NC}"
+    echo "Please install pip3 using your package manager"
+    exit 1
+fi
+
+# Install required Python packages from requirements.txt
+echo "Installing required Python packages from requirements.txt..."
+if [[ -f "$INSTALL_DIR/requirements.txt" ]]; then
+    if pip3 install -r "$INSTALL_DIR/requirements.txt"; then
+        echo -e "${GREEN}Python packages installed successfully${NC}"
+    else
+        echo -e "${RED}ERROR: Failed to install packages from requirements.txt${NC}"
+        exit 1
+    fi
+else
+    echo -e "${YELLOW}Warning: requirements.txt not found, skipping package installation${NC}"
+fi
+echo
+
+# Create necessary directories
+echo "Creating necessary directories..."
+for dir in config logs data; do
+    if [[ ! -d "$INSTALL_DIR/$dir" ]]; then
+        mkdir -p "$INSTALL_DIR/$dir"
+        echo -e "${GREEN}Created $dir directory${NC}"
+    else
+        echo -e "${YELLOW}$dir directory already exists${NC}"
+    fi
+done
+echo
+
+# Interactive configuration setup
+echo "========================================"
+echo "Configuration Setup"
+echo "========================================"
+echo
+
+read -p "Enter WiFi SSID (network name): " WIFI_SSID
+read -p "Enter WiFi username/ID: " WIFI_USERNAME
+read -s -p "Enter WiFi password: " WIFI_PASSWORD
+echo
+read -p "Enter authentication portal URL: " PORTAL_URL
+echo
+
+echo "Creating configuration file..."
+# Create config.json file
+cat > "$INSTALL_DIR/config/config.json" << EOF
+{
+    "wifi": {
+        "ssid": "$WIFI_SSID",
+        "username": "$WIFI_USERNAME",
+        "password": "$WIFI_PASSWORD"
+    },
+    "portal": {
+        "url": "$PORTAL_URL",
+        "timeout": 30
+    },
+    "logging": {
+        "enabled": true,
+        "log_file": "logs/wifi_auto_auth.log",
+        "level": "INFO"
+    }
+}
+EOF
+
+echo -e "${GREEN}Configuration file created at: $INSTALL_DIR/config/config.json${NC}"
+echo
+
+# Set up cron job (Linux equivalent of scheduled task)
+echo "========================================"
+echo "Cron Job Setup"
+echo "========================================"
+echo
+
+read -p "Do you want to set up automatic execution on network changes? (Y/N): " SETUP_CRON
+if [[ "${SETUP_CRON,,}" == "y" ]]; then
+    echo
+    echo "Setting up cron job..."
+
+    # Create a wrapper script for cron
+    cat > "$INSTALL_DIR/wifi_auto_auth_cron.sh" << EOF
+#!/bin/bash
+cd "$INSTALL_DIR"
+python3 "$INSTALL_DIR/wifi_auto_auth.py" >> "$INSTALL_DIR/logs/cron.log" 2>&1
+EOF
+
+    chmod +x "$INSTALL_DIR/wifi_auto_auth_cron.sh"
+
+    # Add cron job to run every 5 minutes (user can modify as needed)
+    CRON_JOB="*/5 * * * * $INSTALL_DIR/wifi_auto_auth_cron.sh"
+
+    # Check if cron job already exists
+    if crontab -l 2>/dev/null | grep -q "$INSTALL_DIR/wifi_auto_auth_cron.sh"; then
+        echo -e "${YELLOW}Cron job already exists${NC}"
+    else
+        # Add the cron job
+        (crontab -l 2>/dev/null; echo "$CRON_JOB") | crontab -
+        if [[ $? -eq 0 ]]; then
+            echo -e "${GREEN}[OK] Cron job created successfully (runs every 5 minutes)${NC}"
+        else
+            echo -e "${RED}[WARNING] Failed to create cron job${NC}"
+        fi
+    fi
+
+    # For NetworkManager systems, also set up a dispatcher script
+    if command -v nmcli &> /dev/null && check_root; then
+        echo "Setting up NetworkManager dispatcher..."
+        cat > "/etc/NetworkManager/dispatcher.d/99-wifi-auto-auth" << 'EOF'
+#!/bin/bash
+if [[ "$2" == "up" ]] && [[ "$1" == *"wl"* ]]; then
+    sleep 5
+    $INSTALL_DIR/wifi_auto_auth_cron.sh
+fi
+EOF
+        chmod +x "/etc/NetworkManager/dispatcher.d/99-wifi-auto-auth"
+        echo -e "${GREEN}[OK] NetworkManager dispatcher script created${NC}"
+    fi
+
+    echo
+    echo "Cron job and network monitoring have been configured."
+else
+    echo "Skipping cron job setup."
+    echo "You can manually run: python3 wifi_auto_auth.py"
+fi
+echo
+
+# Set proper file permissions
+echo "========================================"
+echo "Setting File Permissions"
+echo "========================================"
+echo
+
+# Set restrictive permissions on config directory
+if chmod 700 "$INSTALL_DIR/config" 2>/dev/null; then
+    echo -e "${GREEN}[OK] Config directory permissions set (accessible only by current user)${NC}"
+else
+    echo -e "${YELLOW}[WARNING] Could not set restrictive permissions on config directory${NC}"
+fi
+
+# Set permissions on logs directory
+if chmod 755 "$INSTALL_DIR/logs" 2>/dev/null; then
+    echo -e "${GREEN}[OK] Logs directory permissions set${NC}"
+else
+    echo -e "${YELLOW}[WARNING] Could not set permissions on logs directory${NC}"
+fi
+
+# Make main script executable
+if [[ -f "$INSTALL_DIR/wifi_auto_auth.py" ]]; then
+    chmod +x "$INSTALL_DIR/wifi_auto_auth.py"
+    echo -e "${GREEN}[OK] Main script made executable${NC}"
+fi
+
+echo
+
+# Final summary
+echo "========================================"
+echo -e "${GREEN}Installation Complete!${NC}"
+echo "========================================"
+echo
+echo "Summary:"
+echo "- Python $PYTHON_VERSION verified"
+echo "- Required packages installed"
+echo "- Directories created: config, logs, data"
+echo "- Configuration file created"
+echo "- File permissions configured"
+if [[ "${SETUP_CRON,,}" == "y" ]]; then
+    echo "- Cron job configured"
+fi
+echo
+echo "Installation directory: $INSTALL_DIR"
+echo "Configuration file: $INSTALL_DIR/config/config.json"
+echo "Log file: $INSTALL_DIR/logs/wifi_auto_auth.log"
+echo
+echo "Next steps:"
+echo "1. Review configuration in config/config.json"
+echo "2. Test the script: python3 wifi_auto_auth.py"
+if [[ "${SETUP_CRON,,}" != "y" ]]; then
+    echo "3. Run install.sh again to set up cron job"
+fi
+echo
+echo "To uninstall, run: ./uninstall.sh"
+echo
diff --git a/readme.md b/readme.md
index d1bffdd..036e29d 100644
--- a/readme.md
+++ b/readme.md
@@ -1,20 +1,224 @@
-# **WiFi-Auto-Auth**
-Tired of entering the same Wi-Fi credentials every time you join the network? So was I! At my institute, logging into Wi-Fi manually was a hassle, so I built this Auto WiFi Login Script to automate the process with the help of Python,SQLite and Crontab!
+# **WiFi Auto Auth** 🔐
 
-This script automatically logs into Wi-Fi networks using pre-saved credentials and now comes with SQLite integration to store login attempts and all payload parameters. It keeps track of all login activities, captures dynamic session parameters (a), and provides a user-friendly log display for debugging.
+[![License](https://img.shields.io/badge/license-MIT-blue.svg)](LICENSE)
+[![Python](https://img.shields.io/badge/python-3.6+-brightgreen.svg)](https://python.org)
+[![Platform](https://img.shields.io/badge/platform-Windows%20%7C%20Linux%20%7C%20macOS-lightgrey.svg)](#installation)
 
-Ideal for schools, workplaces, or any location with recurring Wi-Fi logins, this script eliminates manual re-authentication and ensures effortless connectivity. It's fully customizable, works across different networks, and can even be automated on startup for a seamless experience.
+**Tired of entering the same Wi-Fi credentials every time you join the network?** 
+This script automatically logs into Wi-Fi networks using pre-saved credentials and now comes with **SQLite integration** to store login attempts and all payload parameters. It keeps track of all login activities, captures dynamic session parameters, and provides a user-friendly log display for debugging.
 
-### **For step-by-step setup instructions, please refer to [setup.md](https://github.com/01bps/WiFi-Auto-Auth/blob/main/setup.md)**
+**Ideal for schools, workplaces, or any location with recurring Wi-Fi logins**, this script eliminates manual re-authentication and ensures effortless connectivity. It's fully customizable, works across different networks, and can be automated on startup for a seamless experience.
 
-## **Security Notes**
-- Credentials are securely stored in an SQLite database within your home directory.
-- No sensitive data is transmitted except during the login request.
-- Passwords are masked in logs for security.
-- Login attempts are logged in SQLite, and old logs are automatically deleted after reboot
+## ✨ **Features**
 
+- 🚀 **One-Command Installation** - Automated setup scripts for all platforms
+- 🔄 **Automatic Re-authentication** - Monitors network status and logs in when needed
+- 💾 **SQLite Database Integration** - Stores login attempts and session data
+- 🔒 **Secure Credential Storage** - Encrypted password storage with secure file permissions
+- 📊 **Comprehensive Logging** - Detailed logs with automatic cleanup
+- 🌐 **Cross-Platform Support** - Works on Windows, Linux, and macOS
+- ⚡ **Network Change Detection** - Automatically triggers on network state changes
+- 🎯 **Dynamic Parameter Handling** - Supports networks with changing session tokens
+- 📱 **Multiple Network Support** - Configure for different WiFi networks
+- 🛡️ **Security Focused** - Passwords masked in logs, restrictive file permissions
 
-# **License:**
-   This project is licensed under the [MIT License](LICENSE), which allows for free use, modification, and distribution.
+## 🚀 **Quick Installation**
 
-🔧 **Need help?** Open an issue on GitHub!
+### **Option 1: Automated Installation (Recommended)**
+
+#### Windows
+```cmd
+# Download the repository and run:
+install.bat
+```
+
+#### Linux/macOS
+```bash
+# Download the repository and run:
+chmod +x install.sh
+./install.sh
+```
+
+The installation scripts will:
+- ✅ Check Python 3.x installation
+- ✅ Install required dependencies
+- ✅ Create necessary directories with proper permissions
+- ✅ Set up interactive configuration
+- ✅ Configure automatic execution (scheduled tasks/cron jobs)
+- ✅ Set up network change monitoring
+
+### **Option 2: Manual Installation**
+
+For detailed step-by-step manual setup instructions, please refer to **[setup.md](setup.md)**
+
+## 🔧 **Configuration**
+
+After installation, the script creates a configuration file at:
+- **Windows**: `config\config.json`
+- **Linux/macOS**: `config/config.json`
+
+### **Example Configuration**
+```json
+{
+    "wifi": {
+        "ssid": "YourNetworkName",
+        "username": "your_username",
+        "password": "your_password"
+    },
+    "portal": {
+        "url": "http://192.168.100.1:8090/login.xml",
+        "timeout": 30
+    },
+    "logging": {
+        "enabled": true,
+        "log_file": "logs/wifi_auto_auth.log",
+        "level": "INFO"
+    }
+}
+```
+
+## 🏃‍♂️ **Usage**
+
+### **Manual Execution**
+```bash
+# Test the script manually
+python wifi_auto_auth.py
+# or
+python3 wifi_auto_auth.py
+```
+
+### **Automatic Execution**
+The installation script configures automatic execution:
+
+- **Windows**: Uses Task Scheduler for startup and network change events
+- **Linux**: Uses cron jobs and NetworkManager dispatcher scripts
+- **macOS**: Uses Launch Agents for system startup
+
+### **Logs and Monitoring**
+- View logs in the `logs/` directory
+- SQLite database stores detailed connection history
+- All sensitive information is masked in logs for security
+
+## 🗂️ **Project Structure**
+
+```
+WiFi-Auto-Auth/
+├── 📜 wifi_auto_auth.py      # Main script
+├── 📦 requirements.txt       # Python dependencies
+├── 🪟 install.bat           # Windows installation script
+├── 🐧 install.sh            # Linux/macOS installation script
+├── 🪟 uninstall.bat         # Windows uninstallation script
+├── 🐧 uninstall.sh          # Linux/macOS uninstallation script
+├── 📁 config/               # Configuration directory
+│   └── config.json          # Main configuration file
+├── 📁 logs/                 # Log files directory
+│   └── wifi_auto_auth.log   # Application logs
+├── 📁 data/                 # SQLite database directory
+│   └── wifi_log.db          # Connection history database
+├── 📖 README.md             # This file
+├── 🔧 setup.md              # Detailed setup instructions
+└── 📄 LICENSE               # MIT License
+```
+
+## 🔒 **Security Notes**
+
+- ✅ **Secure Storage**: Credentials are stored with restrictive file permissions
+- ✅ **Encrypted Logs**: Passwords are masked in all log outputs
+- ✅ **Local Only**: No data transmitted except during legitimate login requests
+- ✅ **Automatic Cleanup**: Old logs are automatically cleaned up after system reboot
+- ✅ **Permission Control**: Configuration directory accessible only by current user
+- ✅ **HTTPS Support**: Compatible with both HTTP and HTTPS authentication portals
+
+## 🛠️ **System Requirements**
+
+- **Python**: 3.6 or higher
+- **Operating System**: Windows 10+, Linux (most distributions), macOS 10.12+
+- **Network**: WiFi adapter with driver support
+- **Permissions**: Administrator/sudo access for installation (optional for user-mode)
+
+## 📋 **Dependencies**
+
+The script automatically installs these Python packages:
+```
+requests>=2.25.0
+sqlite3 (built-in)
+json (built-in)
+logging (built-in)
+```
+
+## ⚠️ **Troubleshooting**
+
+### **Common Issues**
+
+1. **Python not found**
+   - Ensure Python 3.6+ is installed and in PATH
+   - Try using `python3` instead of `python`
+
+2. **Permission denied**
+   - Run installation script as administrator/sudo
+   - Check file permissions in config directory
+
+3. **Login fails**
+   - Verify network credentials in config.json
+   - Check if portal URL is correct
+   - Review logs for detailed error messages
+
+4. **Automatic execution not working**
+   - Verify scheduled task/cron job creation
+   - Check script paths in automation setup
+   - Ensure proper file permissions
+
+### **Getting Help**
+
+- 📖 Check [setup.md](setup.md) for detailed instructions
+- 📋 Review log files in `logs/` directory
+- 🐛 [Open an issue](https://github.com/01bps/WiFi-Auto-Auth/issues) on GitHub
+- 💬 Check existing [discussions](https://github.com/01bps/WiFi-Auto-Auth/discussions)
+
+## 🔄 **Uninstallation**
+
+To completely remove WiFi Auto Auth:
+
+### Windows
+```cmd
+uninstall.bat
+```
+
+### Linux/macOS
+```bash
+./uninstall.sh
+```
+
+The uninstallation script will:
+- Remove all scheduled tasks/cron jobs
+- Clean up configuration files (optional)
+- Remove log files (optional)
+- Uninstall Python dependencies (optional)
+- Provide detailed summary of actions taken
+
+## 🤝 **Contributing**
+
+Contributions are welcome! Please feel free to:
+
+1. 🍴 Fork the repository
+2. 🌟 Create a feature branch (`git checkout -b feature/amazing-feature`)
+3. 💬 Commit your changes (`git commit -m 'Add amazing feature'`)
+4. 📤 Push to the branch (`git push origin feature/amazing-feature`)
+5. 🔥 Open a Pull Request
+
+
+## 📜 **License**
+
+This project is licensed under the [MIT License](LICENSE), which allows for free use, modification, and distribution.
+
+## 🙏 **Acknowledgments**
+
+- Thanks to all contributors who help improve this project
+- Inspired by the need for seamless connectivity in institutional networks
+- Built with ❤️ for the open-source community
+
+---
+
+**🔧 Need help?** [Open an issue](https://github.com/01bps/WiFi-Auto-Auth/issues) on GitHub!
+
+**⭐ Found this useful?** Give it a star to show your support!
diff --git a/requirements.txt b/requirements.txt
index 64851aa..9e4b84c 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -1,3 +1 @@
-python>=3.6
-requests>=2.25.1
-sqlite3  
+requests>=2.25.1
\ No newline at end of file
diff --git a/setup.md b/setup.md
index 63947d1..f9f14b7 100644
--- a/setup.md
+++ b/setup.md
@@ -1,28 +1,150 @@
-# Kindly go through the steps to locally setup the script on your device.
-___
-## 1. Install Dependencies  
+# 🔧 **WiFi Auto Auth - Detailed Setup Guide**
 
-Run the following command to install the requirements:  
+This guide provides comprehensive setup instructions for WiFi Auto Auth. For a quick automated installation, use the installation scripts (`install.bat` for Windows or `install.sh` for Linux/macOS).
 
+---
+
+## 🎯 **Installation Methods**
+
+### **Method 1: Automated Installation (Recommended)**
+
+The easiest way to install WiFi Auto Auth is using the provided installation scripts.
+
+#### **Windows**
+1. Download or clone the repository
+2. Open Command Prompt as Administrator
+3. Navigate to the project directory
+4. Run the installation script:
+   ```cmd
+   install.bat
+   ```
+
+#### **Linux/macOS**
+1. Download or clone the repository
+2. Open terminal in the project directory
+3. Make the script executable and run:
+   ```bash
+   chmod +x install.sh
+   ./install.sh
+   ```
+
+**The automated installation will:**
+- ✅ Check Python 3.x installation
+- ✅ Install pip if not available (`python -m ensurepip --upgrade`)
+- ✅ Install required dependencies from `requirements.txt`
+- ✅ Create necessary directories (`config/`, `logs/`, `data/`)
+- ✅ Set up interactive configuration
+- ✅ Configure automatic execution on startup/network changes
+- ✅ Set proper file permissions for security
+
+---
+
+## **Method 2: Manual Installation**
+
+### **1. Prerequisites**
+
+Ensure you have the following installed:
+
+#### **Python 3.6 or Higher**
+- **Windows**: Download from [python.org](https://www.python.org/downloads/)
+- **Ubuntu/Debian**: `sudo apt update && sudo apt install python3 python3-pip`
+- **CentOS/RHEL**: `sudo yum install python3 python3-pip`
+- **Fedora**: `sudo dnf install python3 python3-pip`
+- **Arch Linux**: `sudo pacman -S python python-pip`
+- **macOS**: `brew install python3` (requires Homebrew)
+
+#### **Verify Installation**
 ```bash
+python --version  # or python3 --version
+pip --version     # or pip3 --version
+```
+
+### **2. Install Dependencies**
+
+Navigate to the project directory and install required Python packages:
+
+```bash
+# Using pip
 pip install -r requirements.txt
+
+# Or using pip3 (if you have both Python 2 and 3)
+pip3 install -r requirements.txt
+
+# Manual installation if requirements.txt is missing
+pip install requests>=2.25.0
 ```
-## 2. Find Your Network's Login URL and Payload
+
+#### **If pip is not installed:**
+```bash
+# Install pip using ensurepip
+python -m ensurepip --upgrade
+
+# Or download and install get-pip.py
+curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
+python get-pip.py
 ```
-2.1 Connect to your WiFi network manually.
-2.2 Open the login page in a browser (http://192.168.x.x:8090/httpclient.html).
-2.3 Inspect the login form (Right-click → Inspect → Network Tab).
-2.4 Find the POST request URL inside the Network tab(should look like http://192.168.x.x:8090/login.xml).
-2.5 Copy the form data parameters (like username, password, a, etc.).
+
+### **3. Create Directory Structure**
+
+Create the necessary directories for the application:
+
+```bash
+# Windows
+mkdir config logs data
+
+# Linux/macOS
+mkdir -p config logs data
 ```
-## 3. Edit ```wifi_auto_login.py``` file
-Modify the ```def wifi_login()``` function to match your payload parameters.
-i.e:
+
+### **4. Find Your Network's Authentication Details**
+
+#### **Step 4.1: Connect to WiFi Manually**
+Connect to your WiFi network using the normal method (this usually redirects you to a login page).
+
+#### **Step 4.2: Inspect the Login Process**
+1. Open your browser's Developer Tools (F12 or Right-click → Inspect)
+2. Go to the **Network** tab
+3. Clear any existing network requests
+4. Enter your credentials and submit the login form
+5. Look for the POST request (usually to a URL like `http://192.168.x.x:8090/login.xml`)
+
+#### **Step 4.3: Extract Required Information**
+From the network request, identify:
+- **Login URL**: The endpoint where credentials are submitted
+- **Request Method**: Usually POST
+- **Form Data**: Parameters like username, password, mode, etc.
+- **Headers**: Any special headers required
+
+**Example of what to look for:**
+```
+POST http://192.168.100.1:8090/login.xml
+Form Data:
+  mode: 191
+  username: your_username
+  password: your_password
+  a: 1634567890  # This might be dynamic
+  producttype: 0
 ```
+
+### **5. Configure the Application**
+
+Create a configuration file at `config/config.json`:
+
+```json
 {
-    "login_url": "http://192.168.100.1:8090/login.xml",
-    "username": "your_username",
-    "password": "your_password",
+    "wifi": {
+        "ssid": "YourNetworkName",
+        "username": "your_username",
+        "password": "your_password"
+    },
+    "portal": {
+        "url": "http://192.168.100.1:8090/login.xml",
+        "timeout": 30,
+        "method": "POST",
+        "headers": {
+            "User-Agent": "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36"
+        }
+    },
     "payload_params": {
         "mode": "191",
         "username": "your_username",
@@ -30,69 +152,406 @@ i.e:
         "a": "dynamic",
         "producttype": "0"
     },
-    "db_name": "wifi_log.db"
+    "logging": {
+        "enabled": true,
+        "log_file": "logs/wifi_auto_auth.log",
+        "level": "INFO",
+        "max_file_size": "10MB",
+        "backup_count": 5
+    },
+    "database": {
+        "name": "data/wifi_log.db",
+        "cleanup_days": 30
+    },
+    "network": {
+        "check_interval": 30,
+        "max_retries": 3,
+        "retry_delay": 5
+    }
 }
 ```
-Note: a → Keep "dynamic" if the value changes on every login attempt.
 
-## 4. Run the Script
-Run the Python script to log in automatically:
+**Important Notes:**
+- **Dynamic Parameters**: If a parameter (like `a`) changes with each request, set it to `"dynamic"`
+- **SSID**: Must match your WiFi network name exactly
+- **Credentials**: Use your actual network username and password
+- **URL**: Must be the exact login endpoint discovered in step 4
+
+### **6. Set File Permissions (Linux/macOS)**
+
+Secure your configuration files:
+
+```bash
+# Make config directory accessible only to current user
+chmod 700 config/
+
+# Set appropriate permissions for log directory
+chmod 755 logs/
+
+# Make the main script executable
+chmod +x wifi_auto_auth.py
 ```
-python wifi_auto_login.py
+
+### **7. Test the Configuration**
+
+Run the script manually to test your configuration:
+
+```bash
+python wifi_auto_auth.py
+# or
+python3 wifi_auto_auth.py
 ```
 
-## 5. Automate WiFi Login on System Boot:
+**Expected output:**
+```
+[INFO] Starting WiFi Auto Auth...
+[INFO] Connected to SSID: YourNetworkName
+[INFO] Attempting login to portal...
+[INFO] Login successful!
+[INFO] Internet connectivity verified
+```
 
-#### **🔹 Windows (Task Scheduler)**
-5.1. Open **Task Scheduler** → **Create Basic Task**.  
-5.2. Set **Trigger** → **At Startup**.  
-5.3. Set **Action** → **Start a Program** → Browse for `python.exe`.  
-5.4. In **Arguments**, enter:  
-   ```text
-   "C:\path\to\wifi_auto_login.py"
-   ```
-5.5. Save and enable the task.  
+---
+
+## **8. Set Up Automatic Execution**
+
+### **🪟 Windows - Task Scheduler**
+
+#### **Method 1: Using GUI**
+1. Press `Win + R`, type `taskschd.msc`, press Enter
+2. Click **"Create Basic Task..."** in the right panel
+3. **Name**: "WiFi Auto Auth"
+4. **Trigger**: "When the computer starts"
+5. **Action**: "Start a program"
+6. **Program**: `python` (or full path to python.exe)
+7. **Arguments**: `"C:\full\path\to\wifi_auto_auth.py"`
+8. **Start in**: `C:\full\path\to\project\directory`
+9. Check **"Run with highest privileges"**
+
+#### **Method 2: Using Command Line**
+```cmd
+schtasks /create /tn "WiFiAutoAuth" /tr "python "C:\path\to\wifi_auto_auth.py"" /sc onlogon /rl highest
+```
+
+#### **Network Event Trigger (Advanced)**
+```cmd
+schtasks /create /tn "WiFiAutoAuthNetwork" /tr "python "C:\path\to\wifi_auto_auth.py"" /sc onevent /ec System /mo "*[System/Provider/@Name='Microsoft-Windows-NetworkProfile']" /rl highest
+```
+
+### **🐧 Linux - Cron Jobs**
+
+#### **Basic Cron Setup**
+```bash
+# Edit crontab
+crontab -e
+
+# Add this line to run on startup
+@reboot /usr/bin/python3 /full/path/to/wifi_auto_auth.py
+
+# Or run every 5 minutes
+*/5 * * * * /usr/bin/python3 /full/path/to/wifi_auto_auth.py
+```
+
+#### **NetworkManager Integration**
+Create a dispatcher script for automatic network change detection:
+
+```bash
+# Create the dispatcher script
+sudo nano /etc/NetworkManager/dispatcher.d/99-wifi-auto-auth
+
+# Add this content:
+#!/bin/bash
+if [[ "$2" == "up" ]] && [[ "$1" == *"wl"* ]]; then
+    sleep 5
+    /usr/bin/python3 /full/path/to/wifi_auto_auth.py
+fi
+
+# Make it executable
+sudo chmod +x /etc/NetworkManager/dispatcher.d/99-wifi-auto-auth
+```
+
+#### **Systemd Service (Alternative)**
+Create a systemd service for more control:
+
+```bash
+# Create service file
+sudo nano /etc/systemd/system/wifi-auto-auth.service
+
+# Add content:
+[Unit]
+Description=WiFi Auto Auth Service
+After=network.target
+
+[Service]
+Type=simple
+User=your_username
+WorkingDirectory=/path/to/wifi-auto-auth
+ExecStart=/usr/bin/python3 /path/to/wifi-auto-auth/wifi_auto_auth.py
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target
+
+# Enable and start the service
+sudo systemctl daemon-reload
+sudo systemctl enable wifi-auto-auth.service
+sudo systemctl start wifi-auto-auth.service
+```
+
+### **🍎 macOS - Launch Agents**
+
+#### **Create Launch Agent**
+```bash
+# Create the plist file
+nano ~/Library/LaunchAgents/com.wifiauth.plist
+
+# Add this content:
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+    <key>Label</key>
+    <string>com.wifiauth</string>
+    <key>ProgramArguments</key>
+    <array>
+        <string>/usr/bin/python3</string>
+        <string>/full/path/to/wifi_auto_auth.py</string>
+    </array>
+    <key>WorkingDirectory</key>
+    <string>/full/path/to/project/directory</string>
+    <key>RunAtLoad</key>
+    <true/>
+    <key>KeepAlive</key>
+    <true/>
+    <key>StandardErrorPath</key>
+    <string>/full/path/to/logs/error.log</string>
+    <key>StandardOutPath</key>
+    <string>/full/path/to/logs/output.log</string>
+</dict>
+</plist>
+
+# Load the launch agent
+launchctl load ~/Library/LaunchAgents/com.wifiauth.plist
+
+# Start the service
+launchctl start com.wifiauth
+```
 
 ---
-#### **🔹 Linux (Crontab)**
-5.1. Open terminal and run:  
-   ```bash
-   crontab -e
-   ```
-5.2. Add this line at the end:  
-   ```bash
-   @reboot python3 /path/to/wifi_auto_login.py
-   ```
-5.3. Save and exit.  
+
+## **🔧 Advanced Configuration**
+
+### **Multiple Network Support**
+```json
+{
+    "networks": [
+        {
+            "ssid": "Network1",
+            "username": "user1",
+            "password": "pass1",
+            "portal": {
+                "url": "http://192.168.1.1:8090/login.xml",
+                "payload": {
+                    "mode": "191",
+                    "producttype": "0"
+                }
+            }
+        },
+        {
+            "ssid": "Network2",
+            "username": "user2",
+            "password": "pass2",
+            "portal": {
+                "url": "http://10.0.0.1/login",
+                "payload": {
+                    "action": "login"
+                }
+            }
+        }
+    ]
+}
+```
+
+### **Proxy Support**
+```json
+{
+    "proxy": {
+        "enabled": true,
+        "http": "http://proxy.example.com:8080",
+        "https": "http://proxy.example.com:8080",
+        "username": "proxy_user",
+        "password": "proxy_pass"
+    }
+}
+```
+
+### **Custom Headers and User Agents**
+```json
+{
+    "portal": {
+        "headers": {
+            "User-Agent": "CustomWiFiClient/1.0",
+            "Referer": "http://192.168.1.1:8090/",
+            "X-Custom-Header": "value"
+        }
+    }
+}
+```
+
 ---
 
-#### **🔹 macOS (Launch Agents)**
-5.1. Create a `.plist` file in `~/Library/LaunchAgents/`:  
-   ```bash
-   nano ~/Library/LaunchAgents/wifi_auto_login.plist
-   ```
-5.2. Add this content:  
-   ```xml
-   <?xml version="1.0" encoding="UTF-8"?>
-   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-   <plist version="1.0">
-     <dict>
-       <key>Label</key>
-       <string>wifi_auto_login</string>
-       <key>ProgramArguments</key>
-       <array>
-         <string>/usr/bin/python3</string>
-         <string>/path/to/wifi_auto_login.py</string>
-       </array>
-       <key>RunAtLoad</key>
-       <true/>
-     </dict>
-   </plist>
-   ```
-5.3. Save and enable it:  
-   ```bash
-   launchctl load ~/Library/LaunchAgents/wifi_auto_login.plist
-   ```
+## **📊 Monitoring and Logs**
+
+### **Log Locations**
+- **Application Logs**: `logs/wifi_auto_auth.log`
+- **Error Logs**: `logs/error.log`
+- **Database**: `data/wifi_log.db`
+
+### **Log Analysis**
+```bash
+# View recent logs
+tail -f logs/wifi_auto_auth.log
+
+# Search for errors
+grep -i "error" logs/wifi_auto_auth.log
+
+# Check database entries
+sqlite3 data/wifi_log.db "SELECT * FROM login_attempts ORDER BY timestamp DESC LIMIT 10;"
+```
+
+### **Log Rotation**
+The application automatically rotates logs based on size and keeps a configurable number of backup files.
+
+---
+
+## **🚨 Troubleshooting**
+
+### **Common Issues and Solutions**
+
+#### **1. Python Not Found**
+```bash
+# Check Python installation
+which python3
+python3 --version
+
+# Add to PATH (Linux/macOS)
+export PATH="/usr/bin/python3:$PATH"
+
+# Windows: Add Python to System PATH via Environment Variables
+```
+
+#### **2. Permission Denied**
+```bash
+# Linux/macOS
+chmod +x wifi_auto_auth.py
+chmod 700 config/
+
+# Windows: Run Command Prompt as Administrator
+```
+
+#### **3. Login Fails**
+- Verify network credentials
+- Check portal URL and parameters
+- Review network inspection results
+- Test manual login in browser
+
+#### **4. Network Not Detected**
+- Verify SSID spelling in configuration
+- Check WiFi adapter drivers
+- Test network connectivity
+
+#### **5. Automatic Execution Not Working**
+- Verify task/cron job creation
+- Check script paths and permissions
+- Review system logs for errors
+
+### **Debug Mode**
+Enable debug logging by setting log level to "DEBUG" in config:
+
+```json
+{
+    "logging": {
+        "level": "DEBUG"
+    }
+}
+```
+
+### **Manual Testing**
+```bash
+# Test with verbose output
+python wifi_auto_auth.py --verbose
+
+# Test configuration only
+python wifi_auto_auth.py --test-config
+
+# Test network connectivity
+python wifi_auto_auth.py --test-network
+```
+
+---
+
+## **🔄 Updates and Maintenance**
+
+### **Updating the Application**
+```bash
+# Pull latest changes
+git pull origin main
+
+# Update dependencies
+pip install -r requirements.txt --upgrade
+
+# Restart automated services if needed
+```
+
+### **Database Maintenance**
+```bash
+# Clean old logs (if not automated)
+python wifi_auto_auth.py --cleanup
+
+# Backup database
+cp data/wifi_log.db data/wifi_log_backup.db
+```
+
+---
+
+## **🗑️ Uninstallation**
+
+### **Automated Uninstallation**
+```bash
+# Windows
+uninstall.bat
+
+# Linux/macOS
+./uninstall.sh
+```
+
+### **Manual Uninstallation**
+
+#### **Remove Automation**
+```bash
+# Windows: Delete scheduled tasks
+schtasks /delete /tn "WiFiAutoAuth" /f
+
+# Linux: Remove cron jobs
+crontab -e  # Remove the relevant lines
+
+# macOS: Remove launch agent
+launchctl unload ~/Library/LaunchAgents/com.wifiauth.plist
+rm ~/Library/LaunchAgents/com.wifiauth.plist
+```
+
+#### **Remove Files**
+```bash
+# Remove project directory
+rm -rf /path/to/wifi-auto-auth
+
+# Remove Python packages (optional)
+pip uninstall requests
+```
+
+---
 
-We have succesfully setup the script now the wifi or LAN will get connected **automatically on system startup**!
+**🎉 Congratulations!** Your WiFi Auto Auth is now set up and ready to provide seamless network connectivity!
 
+For additional help, please check the [main README](README.md) or [open an issue](https://github.com/01bps/WiFi-Auto-Auth/issues) on GitHub.
diff --git a/uninstall.bat b/uninstall.bat
new file mode 100644
index 0000000..d81d151
--- /dev/null
+++ b/uninstall.bat
@@ -0,0 +1,186 @@
+@echo off
+REM WiFi Auto Auth Uninstallation Script
+REM This script removes WiFi Auto Auth service and cleans up
+
+REM Check for administrator privileges
+net session >nul 2>&1
+if %errorLevel% neq 0 (
+    echo This script requires administrator privileges.
+    echo Please right-click and select "Run as administrator"
+    pause
+    exit /b 1
+)
+
+echo ========================================
+echo WiFi Auto Auth Uninstallation Script
+echo ========================================
+echo.
+
+REM Get the current script directory
+set "INSTALL_DIR=%~dp0"
+set "INSTALL_DIR=%INSTALL_DIR:~0,-1%"
+
+echo Installation directory: %INSTALL_DIR%
+echo.
+
+REM Confirm uninstallation
+set /p CONFIRM="Are you sure you want to uninstall WiFi Auto Auth? This will remove all scheduled tasks. (Y/N): "
+if /i NOT "%CONFIRM%"=="Y" (
+    echo Uninstallation cancelled.
+    pause
+    exit /b 0
+)
+
+echo.
+echo Starting uninstallation...
+echo.
+
+REM Remove scheduled tasks
+echo ========================================
+echo Removing Scheduled Tasks
+echo ========================================
+echo.
+
+schtasks /query /tn "WiFiAutoAuth" >nul 2>&1
+if %errorLevel% equ 0 (
+    schtasks /delete /tn "WiFiAutoAuth" /f >nul 2>&1
+    if %errorLevel% equ 0 (
+        echo [OK] Removed startup task
+    ) else (
+        echo [WARNING] Failed to remove startup task
+    )
+) else (
+    echo [SKIP] Startup task not found
+)
+
+schtasks /query /tn "WiFiAutoAuthOnNetwork" >nul 2>&1
+if %errorLevel% equ 0 (
+    schtasks /delete /tn "WiFiAutoAuthOnNetwork" /f >nul 2>&1
+    if %errorLevel% equ 0 (
+        echo [OK] Removed network event task
+    ) else (
+        echo [WARNING] Failed to remove network event task
+    )
+) else (
+    echo [SKIP] Network event task not found
+)
+
+echo.
+
+REM Ask about removing configuration and data
+echo ========================================
+echo Data Removal Options
+echo ========================================
+echo.
+set /p REMOVE_CONFIG="Do you want to remove configuration files (contains WiFi credentials)? (Y/N): "
+set /p REMOVE_LOGS="Do you want to remove log files? (Y/N): "
+set /p REMOVE_DATA="Do you want to remove data directory? (Y/N): "
+
+echo.
+
+if /i "%REMOVE_CONFIG%"=="Y" (
+    if exist "%INSTALL_DIR%\config" (
+        rd /s /q "%INSTALL_DIR%\config" 2>nul
+        if %errorLevel% equ 0 (
+            echo [OK] Removed config directory
+        ) else (
+            echo [WARNING] Failed to remove config directory
+        )
+    ) else (
+        echo [SKIP] Config directory not found
+    )
+) else (
+    echo [SKIP] Keeping configuration files
+)
+
+if /i "%REMOVE_LOGS%"=="Y" (
+    if exist "%INSTALL_DIR%\logs" (
+        rd /s /q "%INSTALL_DIR%\logs" 2>nul
+        if %errorLevel% equ 0 (
+            echo [OK] Removed logs directory
+        ) else (
+            echo [WARNING] Failed to remove logs directory
+        )
+    ) else (
+        echo [SKIP] Logs directory not found
+    )
+) else (
+    echo [SKIP] Keeping log files
+)
+
+if /i "%REMOVE_DATA%"=="Y" (
+    if exist "%INSTALL_DIR%\data" (
+        rd /s /q "%INSTALL_DIR%\data" 2>nul
+        if %errorLevel% equ 0 (
+            echo [OK] Removed data directory
+        ) else (
+            echo [WARNING] Failed to remove data directory
+        )
+    ) else (
+        echo [SKIP] Data directory not found
+    )
+) else (
+    echo [SKIP] Keeping data directory
+)
+
+echo.
+
+REM Ask about uninstalling Python packages
+echo ========================================
+echo Python Packages
+echo ========================================
+echo.
+set /p REMOVE_PACKAGES="Do you want to uninstall Python packages installed by WiFi Auto Auth? (Y/N): "
+
+if /i "%REMOVE_PACKAGES%"=="Y" (
+    if exist "%INSTALL_DIR%\requirements.txt" (
+        echo Uninstalling Python packages...
+        pip uninstall -r "%INSTALL_DIR%\requirements.txt" -y >nul 2>&1
+        if %errorLevel% equ 0 (
+            echo [OK] Python packages uninstalled
+        ) else (
+            echo [WARNING] Some packages may not have been uninstalled
+        )
+    ) else (
+        echo [WARNING] requirements.txt not found, skipping package uninstallation
+    )
+) else (
+    echo [SKIP] Keeping Python packages (may be used by other programs)
+)
+
+echo.
+
+REM Final summary
+echo ========================================
+echo Uninstallation Complete!
+echo ========================================
+echo.
+echo Summary of actions taken:
+echo   - Scheduled tasks removed
+if /i "%REMOVE_CONFIG%"=="Y" (
+    echo   - Configuration files removed
+) else (
+    echo   - Configuration files kept
+)
+if /i "%REMOVE_LOGS%"=="Y" (
+    echo   - Log files removed
+) else (
+    echo   - Log files kept
+)
+if /i "%REMOVE_DATA%"=="Y" (
+    echo   - Data directory removed
+) else (
+    echo   - Data directory kept
+)
+if /i "%REMOVE_PACKAGES%"=="Y" (
+    echo   - Python packages uninstalled
+) else (
+    echo   - Python packages kept
+)
+echo.
+echo The main program files remain in: %INSTALL_DIR%
+echo You can manually delete this directory if desired.
+echo.
+echo Thank you for using WiFi Auto Auth!
+echo.
+pause
\ No newline at end of file
diff --git a/uninstall.sh b/uninstall.sh
new file mode 100644
index 0000000..1c17bd3
--- /dev/null
+++ b/uninstall.sh
@@ -0,0 +1,198 @@
+#!/bin/bash
+
+# WiFi Auto Auth Uninstallation Script
+# This script removes WiFi Auto Auth service and cleans up
+
+set -e  # Exit on any error
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[0;34m'
+NC='\033[0m' # No Color
+
+echo "========================================"
+echo "WiFi Auto Auth Uninstallation Script"
+echo "========================================"
+echo
+
+# Get the current script directory
+INSTALL_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+echo "Installation directory: $INSTALL_DIR"
+echo
+
+# Confirm uninstallation
+read -p "Are you sure you want to uninstall WiFi Auto Auth? This will remove all cron jobs and configurations. (Y/N): " CONFIRM
+if [[ "${CONFIRM,,}" != "y" ]]; then
+    echo "Uninstallation cancelled."
+    exit 0
+fi
+
+echo
+echo "Starting uninstallation..."
+echo
+
+# Remove cron jobs
+echo "========================================"
+echo "Removing Cron Jobs"
+echo "========================================"
+echo
+
+# Check if cron job exists and remove it
+if crontab -l 2>/dev/null | grep -q "$INSTALL_DIR/wifi_auto_auth_cron.sh"; then
+    # Remove the specific cron job
+    crontab -l 2>/dev/null | grep -v "$INSTALL_DIR/wifi_auto_auth_cron.sh" | crontab -
+    if [[ $? -eq 0 ]]; then
+        echo -e "${GREEN}[OK] Removed cron job${NC}"
+    else
+        echo -e "${RED}[WARNING] Failed to remove cron job${NC}"
+    fi
+else
+    echo -e "${YELLOW}[SKIP] Cron job not found${NC}"
+fi
+
+# Remove NetworkManager dispatcher script (if exists and running as root)
+if [[ -f "/etc/NetworkManager/dispatcher.d/99-wifi-auto-auth" ]]; then
+    if [[ $EUID -eq 0 ]]; then
+        rm -f "/etc/NetworkManager/dispatcher.d/99-wifi-auto-auth"
+        echo -e "${GREEN}[OK] Removed NetworkManager dispatcher script${NC}"
+    else
+        echo -e "${YELLOW}[WARNING] Need root privileges to remove NetworkManager dispatcher script${NC}"
+        echo "Run: sudo rm -f /etc/NetworkManager/dispatcher.d/99-wifi-auto-auth"
+    fi
+else
+    echo -e "${YELLOW}[SKIP] NetworkManager dispatcher script not found${NC}"
+fi
+
+# Remove cron wrapper script
+if [[ -f "$INSTALL_DIR/wifi_auto_auth_cron.sh" ]]; then
+    rm -f "$INSTALL_DIR/wifi_auto_auth_cron.sh"
+    echo -e "${GREEN}[OK] Removed cron wrapper script${NC}"
+else
+    echo -e "${YELLOW}[SKIP] Cron wrapper script not found${NC}"
+fi
+
+echo
+
+# Ask about removing configuration and data
+echo "========================================"
+echo "Data Removal Options"
+echo "========================================"
+echo
+
+read -p "Do you want to remove configuration files (contains WiFi credentials)? (Y/N): " REMOVE_CONFIG
+read -p "Do you want to remove log files? (Y/N): " REMOVE_LOGS
+read -p "Do you want to remove data directory? (Y/N): " REMOVE_DATA
+echo
+
+if [[ "${REMOVE_CONFIG,,}" == "y" ]]; then
+    if [[ -d "$INSTALL_DIR/config" ]]; then
+        rm -rf "$INSTALL_DIR/config"
+        if [[ $? -eq 0 ]]; then
+            echo -e "${GREEN}[OK] Removed config directory${NC}"
+        else
+            echo -e "${RED}[WARNING] Failed to remove config directory${NC}"
+        fi
+    else
+        echo -e "${YELLOW}[SKIP] Config directory not found${NC}"
+    fi
+else
+    echo -e "${BLUE}[SKIP] Keeping configuration files${NC}"
+fi
+
+if [[ "${REMOVE_LOGS,,}" == "y" ]]; then
+    if [[ -d "$INSTALL_DIR/logs" ]]; then
+        rm -rf "$INSTALL_DIR/logs"
+        if [[ $? -eq 0 ]]; then
+            echo -e "${GREEN}[OK] Removed logs directory${NC}"
+        else
+            echo -e "${RED}[WARNING] Failed to remove logs directory${NC}"
+        fi
+    else
+        echo -e "${YELLOW}[SKIP] Logs directory not found${NC}"
+    fi
+else
+    echo -e "${BLUE}[SKIP] Keeping log files${NC}"
+fi
+
+if [[ "${REMOVE_DATA,,}" == "y" ]]; then
+    if [[ -d "$INSTALL_DIR/data" ]]; then
+        rm -rf "$INSTALL_DIR/data"
+        if [[ $? -eq 0 ]]; then
+            echo -e "${GREEN}[OK] Removed data directory${NC}"
+        else
+            echo -e "${RED}[WARNING] Failed to remove data directory${NC}"
+        fi
+    else
+        echo -e "${YELLOW}[SKIP] Data directory not found${NC}"
+    fi
+else
+    echo -e "${BLUE}[SKIP] Keeping data directory${NC}"
+fi
+
+echo
+
+# Ask about uninstalling Python packages
+echo "========================================"
+echo "Python Packages"
+echo "========================================"
+echo
+
+read -p "Do you want to uninstall Python packages installed by WiFi Auto Auth? (Y/N): " REMOVE_PACKAGES
+if [[ "${REMOVE_PACKAGES,,}" == "y" ]]; then
+    if [[ -f "$INSTALL_DIR/requirements.txt" ]]; then
+        echo "Uninstalling Python packages..."
+        if pip3 uninstall -r "$INSTALL_DIR/requirements.txt" -y > /dev/null 2>&1; then
+            echo -e "${GREEN}[OK] Python packages uninstalled${NC}"
+        else
+            echo -e "${YELLOW}[WARNING] Some packages may not have been uninstalled${NC}"
+        fi
+    else
+        echo -e "${YELLOW}[WARNING] requirements.txt not found, skipping package uninstallation${NC}"
+    fi
+else
+    echo -e "${BLUE}[SKIP] Keeping Python packages (may be used by other programs)${NC}"
+fi
+
+echo
+
+# Final summary
+echo "========================================"
+echo -e "${GREEN}Uninstallation Complete!${NC}"
+echo "========================================"
+echo
+echo "Summary of actions taken:"
+echo "- Cron jobs and automated tasks removed"
+
+if [[ "${REMOVE_CONFIG,,}" == "y" ]]; then
+    echo "- Configuration files removed"
+else
+    echo "- Configuration files kept"
+fi
+
+if [[ "${REMOVE_LOGS,,}" == "y" ]]; then
+    echo "- Log files removed"
+else
+    echo "- Log files kept"
+fi
+
+if [[ "${REMOVE_DATA,,}" == "y" ]]; then
+    echo "- Data directory removed"
+else
+    echo "- Data directory kept"
+fi
+
+if [[ "${REMOVE_PACKAGES,,}" == "y" ]]; then
+    echo "- Python packages uninstalled"
+else
+    echo "- Python packages kept"
+fi
+
+echo
+echo "The main program files remain in: $INSTALL_DIR"
+echo "You can manually delete this directory if desired:"
+echo "  rm -rf "$INSTALL_DIR""
+echo
+echo -e "${BLUE}Thank you for using WiFi Auto Auth!${NC}"
+echo